↓ Advertise on Defender2 ↓

Home > General & Technical (L663) > Compartment - Rear Stowage
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
aajr



Member Since: 18 Dec 2022
Location: San Diego
Posts: 32
United States 
Compartment - Rear Stowage
Does anyone have one of these in their vehicle? Does this tray only work for non hybrid versions, and can it be retrofitted to a regular (non-commercial Defender 110)?


Click image to enlarge


Click image to enlarge


It appears to be specific to the Commercial Model, but cannot tell if it can be adapted to regular models. My interest is in adding a second battery in the rear compartment and this tray would be very helpful to doing that.

If you have one of these, could you help clarify a few things?

It appears to consist of the mounting skeleton (62226A, LR part # LR143080, LR156755, LR160068), and the tray (20104, LR part # LR143075, LR174578). Is this the case?

I am unsure if the cover (part 45520A, LR part # LR143064) is specific to this set up or if it is the normal cover with a hydraulic damper attachment.

Does it attach to the mounting skeleton in front of it, which would be under the rear seat area (part 62226B, LR part # LR143081)?

Thank you for any clarification you can provide.
Post #1009504 30th Sep 2023 2:31pm
View user's profile Send private message View poster's gallery Reply with quote
Hairy Dan



Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1415
United Kingdom 1998 Defender 90 V8 Petrol 50th Auto Chawton White
I don't have any information on the one for the commercial Defender but I do have one of these on my 110


https://huntersprestige.com/collections/in...age-insert



Click image to enlarge


Click image to enlarge

It makes better use of the 'wasted' hole that is down there normally Thumbs Up Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8
Post #1009522 30th Sep 2023 4:52pm
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 
www.ebay.co.uk/itm/275642869105?fits=Plat_...R7CvvvLcYg

or

PowerFul UK

www.ebay.co.uk/itm/175247290740?fits=Plat_...R5Lx0_LcYg

This item WILL fit the Land Rover Defender L663 110 models (but not hybrid models because of batteries) - this is untested with coil spring models.
Post #1009532 30th Sep 2023 5:39pm
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 

Click image to enlarge

There is very little structure in the rear, near the rear seats edge, so I would say you need the frame as high-lighted in Blue.

I have fitted a sliding floor to mine with a hatch to access this wasted space. Which takes a much bigger aux battery.

Good Luck
Post #1009534 30th Sep 2023 5:52pm
View user's profile Send private message View poster's gallery Reply with quote
Hairy Dan



Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1415
United Kingdom 1998 Defender 90 V8 Petrol 50th Auto Chawton White
LR Nuts wrote:
www.ebay.co.uk/itm/275642869105?fits=Plat_Gen%3AL663%7CModel%3ADefender&hash=item402d986571:g:EnEAAOSwT15jz-xG&amdata=enc%3AAQAIAAAA0FHFWubQ5wiP5%2FTi9bxRLbZMuMBwPpaOgyX2ODLtc9v6bEKUtpssUet2BOvc6Z5QeGiUh64LZFtHnXyYT%2BY9w90XUXR6Pg5vsWg11pMFnPF5QnV7bCHHfQvsvsNdm%2FtlZqdVi%2BAvZmbo5BDLp9He4xTXE%2BpouLe7J5ciB4wVZW0ujSOeG%2BzkLWZF0gEVuTjKL6TmZp3l%2BZYGpNJuDoeRsaMNSyH0uJNyQ9IK3UfLp84%2FazeL%2FHu3EeY010DdAlJ6jZ7Tqq6e6%2F39hM12wdDpr24%3D%7Ctkp%3ABk9SR7CvvvLcYg

or

PowerFul UK

www.ebay.co.uk/itm/175247290740?fits=Plat_...R5Lx0_LcYg

This item WILL fit the Land Rover Defender L663 110 models (but not hybrid models because of batteries) - this is untested with coil spring models.



Those are both identical to the one I listed from Hunters (they all come from the same place in China) but are £35 more expensive Confused Rolling Eyes Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8
Post #1009537 30th Sep 2023 6:06pm
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 

Click image to enlarge

When you remove the foam infill this is what you have .


Click image to enlarge

This is what I did, whole cavity is under the wood floor with trap for access. The sliding floor has to be 'out' to gain this access.

Last edited by LR Nuts on 30th Sep 2023 6:18pm. Edited 1 time in total
Post #1009540 30th Sep 2023 6:14pm
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 
Quote:
.....Those are both identical to the one I listed from Hunters (they all come from the same place in China) but are £35 more expensive Confused Rolling Eyes



.... and have limited height, not sufficient for battery. Very Happy
Post #1009542 30th Sep 2023 6:17pm
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 
other photos that may help.....



Click image to enlarge



Click image to enlarge
Post #1009545 30th Sep 2023 6:39pm
View user's profile Send private message View poster's gallery Reply with quote
aajr



Member Since: 18 Dec 2022
Location: San Diego
Posts: 32
United States 
Hairy Dan wrote:
I don't have any information on the one for the commercial Defender but I do have one of these on my 110


Click image to enlarge

It makes better use of the 'wasted' hole that is down there normally Thumbs Up


Unfortunately, this doesn't really work for what I have in mind, as it sacrifices a lot of space. I'm hoping to remove the foam insert and take advantage of all of the space under it, specially since I have a V8 that does not have the hybrid battery system installed taking up space in that area.


LR Nuts wrote:

Click image to enlarge

There is very little structure in the rear, near the rear seats edge, so I would say you need the frame as high-lighted in Blue.


Thank you very much for this. Having to use the forward skeleton to install the rear system won't work for my car, because I need the rear seats to remain, so unfortunately this appears to be a dead end for me. Perhaps others can take advantage of it.

LR Nuts wrote:

Click image to enlarge

When you remove the foam infill this is what you have .


This is what the V8 looks like in the back. No hybrid battery and tons of space. Just need to find a way to create a tray to fit a scecond battery, DC to DC charger, Inverter and mount it in a clean way.
Post #1009685 2nd Oct 2023 1:48am
View user's profile Send private message View poster's gallery Reply with quote
LR Nuts



Member Since: 10 Aug 2022
Location: UK
Posts: 1119
 
Read this thread, shows what I think you need .....

https://www.defender2.net/forum/topic89540.html

..... scroll down ....

find this ....



Click image to enlarge

how to make the board, how to populate it and it all fits in the lower boot space. Thumbs Up Thumbs Up
Post #1009700 2nd Oct 2023 8:34am
View user's profile Send private message View poster's gallery Reply with quote
aajr



Member Since: 18 Dec 2022
Location: San Diego
Posts: 32
United States 
Thank you, I don't think I had seen this video before.
Post #1009966 4th Oct 2023 2:06am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums