↓ Advertise on Defender2 ↓

Home > Td5 > Idler puley - torque settings
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
alexatnd



Member Since: 19 May 2015
Location: Yorkshire
Posts: 285
United Kingdom 
Idler puley - torque settings
Hi,
Noticed the idler pulley sitting at the top of the water pump housing of Gertie my TD5 was squeaking ratrher a lot on startup so as I'm replacing an injector thought I'd replace. it. Removed the anciliary drive belt and replaced pulley but nowhere can i find a torque seting for its bolt.

Been through the haynes manual cant even find. a picturwe of how the belt is supposed to be fitted ( pictures of. 200 and 30 Tdis , but not TD5 .. ).

Can someone point me at the correct torque setting for it?
A Santa - 1977 Series 3 - new chassis, tub, disc brakes,SU Carb
Gertie - 1999 110 TD5 - like a Phoenix from the ashes back on road... almost
Effie - 2004 110 TD5 County
Post #1064495 2nd Apr 2025 10:25am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums