Home > Td5 > Defender headlights not working |
|
|
BaronDefenders Member Since: 28 Jun 2019 Location: London/Cotswolds Posts: 896 |
Normally it is the switches burning out.
Have you checked the fuses? Charlie 1949 Series 1 80 (SOLD) 2002 Td5 90 (SOLD) 2008 Freelander 2 (SOLD) 1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored) 1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE) 2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK) 2012 Puma 110 Zermatt Silver (Overlanding Build) Instagram: @BaronDefenders |
||
22nd Jan 2024 9:13am |
|
Benbencarter5 Member Since: 21 Jan 2024 Location: York Posts: 3 |
Yes I’ve checked all the fuses and replaced both switches.
|
||
22nd Jan 2024 9:18am |
|
BaronDefenders Member Since: 28 Jun 2019 Location: London/Cotswolds Posts: 896 |
Hmmm, odd.
Are you on LED headlights or halogen? Charlie 1949 Series 1 80 (SOLD) 2002 Td5 90 (SOLD) 2008 Freelander 2 (SOLD) 1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored) 1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE) 2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK) 2012 Puma 110 Zermatt Silver (Overlanding Build) Instagram: @BaronDefenders |
||
22nd Jan 2024 9:20am |
|
Benbencarter5 Member Since: 21 Jan 2024 Location: York Posts: 3 |
I was on halogen and then I changed to leds but had the same problem with both.
|
||
22nd Jan 2024 9:21am |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17443 |
I'm not especially familiar with the TD5 wiring but assuming that it is generally similar to the early Puma, there is likely to be an ignition-energised relay which prevents the headlights from being on without the ignition. If this has failed, it would produce the symptoms you describe.
|
||
22nd Jan 2024 9:22am |
|
geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410 |
Ok. Begin with the simple things. Get yourself a multimeter to test that 12v is getting to the switches and headlights. It could be a dodgy connection somewhere, corroded fuse connection or something.
This is your best way forward. |
||
22nd Jan 2024 10:24am |
|
geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410 |
This is the wiring diagram for the TD5 https://www.lrworkshop.com/wiring-diagram/...e-tail/td5
|
||
22nd Jan 2024 10:27am |
|
landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5726 |
Short out / bridge the dim dip relay.
Also make sure the wiring connections and the new light switch are good. New parts aren’t always good parts. |
||
22nd Jan 2024 2:39pm |
|
nosuchthing Member Since: 01 Sep 2022 Location: Woldingham Posts: 22 |
I just want to add to the knowledge base and probability of the various solutions for 'no dipped beam'.
My TD5 recently lost its dipped beam headlights - but sidelights and full beam were still working. A number of suggestions have been made in various posts on the forum - i.e. light switch itself, stalk switch on steering column, and dim/dip relay. The dim/dip relay crops up in many suggestions and is very easy to access (it's behind the speedo panel on the dash - just four screws to take out - no need to disconnect any connectors or speedo cable) - and in my case the relay was in fact the problem. The pink one with reference YWC 10050. A five minute job and the headlights are fine again. Hope this helps someone. |
||
16th Dec 2024 2:22pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis