 | Home > Off Topic > Proctas Peugeot 306 HDI |
 
|
|
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183  
|
Ok I know this is a defender forum, I thought I might as well post up a thread on my 306 HDI, ( gives you something different to read) I have had her for 10 years. She has never missed a beat, and I am in debt to it. In fact I have took the
 out of it really, But then again the car hasn't needed any money thrown at her. (Threw money on two metros instead)
I bought her for shy of 4k when these were fairly new. ( it was 6 years old at the time) Over the years we have gone up and down the country, to btcc events and holidays in Scotland. All I have done is service it my self and when the odd things have gone wrong I have jumped on it like there's no tomorrow. Last year I did toy with the idea of parting company with it for the defender, but for what its worth now and what will happen to it, due to the age. My dad said keep it, so I got shot of the metro and switched the policies over. So this became the second car, ( defenders are too good for second cars,) And this is too good to clock miles on for work and its never missed a beat. The car has come in very handy when the two defenders have been out of action. I have done some cosmetic upgrades,  Click image to enlarge Click image to enlarge these were the cosmetic upgrades Click image to enlarge Click image to enlarge Also its been De catted with a stainless steel exhaust, EGR blanked off, ITG panel filter, Upgraded discs and pads and it has a 5th alloy wheel spare, Which I bought from my local scrappy for £15, Played a practical joke on my dad with it, He thought I had a flat tyre when he saw it in the boot  We fitted bilstein dampers and new front springs last year for the MOT, The sad thing is the non centre wheels no one can be arsed or cannot balance them, So I have 405 alloys with spacers on which really lets the car down. ( I am really hoping to get original wheels back on the car next year, once I have found a place to referb and balance them. So I think its time I have spent some time and money on tidying her up underneath etc. All the electrics work too 
some of you may have had one new etc, I know these are not everyone's cup of tea, But I have to say these were the last decent hot hatch peugeot ever made really. 07 fleet onwards never cut the mustard compared to the 205, 405, and the 06 range. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! Last edited by Procta on 7th Aug 2021 1:20am. Edited 1 time in total |
||
16th Dec 2017 4:20pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10383
|
Kudos to you, I respect anybody who's passionate about any car.
|
||
|
16th Dec 2017 4:43pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10782 
|
Nice one Procta, keep it and look after it
1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
16th Dec 2017 8:05pm |
|
| DSC-off Member Since: 16 Oct 2014 Location: North East Posts: 1428 
|
"The car has come in very handy when the two defenders have been out of action"
Yes, it's always best to have a reliable back up plan if you own a Landrover. It's great to see modern cars being kept on the road, rather than scrapped. Otherwise we'd never see any become old enough to be classics. |
||
|
16th Dec 2017 9:29pm |
|
| DieselBeast Member Since: 27 Sep 2017 Location: UK Posts: 33 
|
She's in good condition.
With all the 'Projects' on the go it's always good to have a reliable one. |
||
|
16th Dec 2017 10:09pm |
|
| lambert.the.farmer Member Since: 11 Apr 2012 Location: harrogate Posts: 2006 
|
If you are wanting to get the original wheels back in service why not give balance beads a try? Rhubarb and custard let fly with their secret weapon.
|
||
|
17th Dec 2017 5:57am |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
cheers for the comments lads, Never thought about balance beads. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
17th Dec 2017 1:07pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
fingers crossed I can give this an Oil change at the weekend, and I can update on some photos of the car, Like my little battery cut off switch and what the car has on etc.
 Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
5th Jan 2018 1:34pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
last week I managed to give this an oil and filters change
Oil was well past it, Looked very dirty and like coffee, which I should have changed last year 
But since the weather was the best it has been, i cracked on. Click image to enlarge Click image to enlarge While the car was warming up, I prepped everything. So i lifted the body up and so that i can access the sump, while that was draining. I turned to this, which is the mother of all pain in the arses on these. The fuel filter, These are that weak, you can snap the top pipes! if you dont get the lid on 100% Believe me lads i have done this,  that was the 1st time i ever went near it! So since then i have just replaced the full works. The filters are included in them, and i am very sure peugeot and citroen do this anyway, as they used to keep them in stock on the shelf!
Click image to enlarge After a little bit of a wrestle with the pipes, and trying to keep the diesel spillage to a min, we were laughing. With this generation of Peugeots been scrapped now, i can get the little pipe that goes under the housing. So i can just pop the space on the new unit now and remove the old one later on. Click image to enlarge yes i had put the pipe on the other way round on the old unit
Five seconds to fit onto the block, but what a battle you have getting the fuel lines clipped on! After a 45 min gental struggle. We were in buissness! Oil filter on and the fresh oil in. Now these can be very, very funny if you dont prime them right, as they wine like hell from the fuel housing! So i have prime the system a good 10 times before the fire up. The car runs sweet as a nut now and a lot more quieter, We are just off a 100k now too! I am wanting to give the brakes a over haul plus a paint under, and change those wheels! Not a bad motor at all for close to 20 years old.
Nothing special lads, i know but its something to read.  Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
25th Feb 2018 7:41pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10782
|
Nice one Procta, all ready to go now
1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
27th Feb 2018 8:34pm |
|
| Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674  
|
Ah the joys of running more than one toy
looks like good work so far 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
|
27th Feb 2018 9:58pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
Old trusty has come to the rescue again, Bailing my parents out. As our terr has a indicator problem.
So I have been wise to keep hold of her, If anything I would say a Peugeot this age and older are a good investment as a little runner about. My friend said, not long now for the big 100k! as its only a 200 miles off now. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
11th Mar 2018 9:44pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
My 1st one was a Dturbo, which had been wound up. I used to kicked over just for the boost! The laugh is the lads on the 306 forum really did do some work on really getting the Dturbo into some good figures! The same goes for the HDI too, now its all died out now sadly due to the age of the car and the backing been only a small fraction of what was a massive community. I could be one of a handful that's still kept the same 306 for years. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
11th Mar 2018 9:48pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5183
|
well put her in for a MOT, At a different centre due to my old garage no longer doing mots sadly. and guess what, it failed. What a surprise there
But its failed on two rear flexi hoses, but the MOT tester said you could do with new discs and pads. Which was what I was planning on doing this year, So I will be changing those for the MOT, so that lots ordered off now 
Also she waited till I got in to drive her before she hit 100k, she was on all the 9s just ready for me! With the parts in order i am hoping to try and get the car back in as soon as possible! Then i can work on getting the orginal wheels back on. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
12th May 2018 7:32pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
