↓ Advertise on Defender2 ↓

Home > Technical > Removing seat box fuse wires (TD5)
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Tandy



Member Since: 14 May 2024
Location: WA State
Posts: 18
United States 
Removing seat box fuse wires (TD5)

Click image to enlarge
I'm trying to remove my seat box ('99 Defender 110 TD5) and I need to remove the electrics under the seat. I have the ECU out, and i've disconnected the plugs from the fuse box, but I can't remove the two brown wires at the bottom of the box.

If I understand correctly, once all wires are disconnected, I feed them and the rubber grommets through the seat box hole.

How do you disconnect the brown wires from the fuse box?

Thanks
Alex

Click image to enlarge
Post #1048196 10th Oct 2024 12:40am
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6638
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
Remove the bolts/screws from the top. Those wires have terminals (right angle shaped I think) which are screwed down.

Pop the top off and you’ll see Smile  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #1048206 10th Oct 2024 7:45am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Tandy



Member Since: 14 May 2024
Location: WA State
Posts: 18
United States 
Thanks Martin, worked like a charm.

Actually I think the plastic top just popped off with a screwdriver and the only screws I had to undo were the two ground/earth brown wires. I removed all the screws initially and it turned out that wasn't necessary. Those were the fuses., but now I know how easy it is to change a blown fuse.

For anyone else it may help, after the ground wires are disconnected from the fuse box, squish the rubber grommets down and push them through the seat box hole. Slowly pull through all the wire harness. There's also one clip on the underside of the seat box that needs to be pulled up by hand.

Cheers



Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge

Last edited by Tandy on 11th Oct 2024 5:24pm. Edited 1 time in total
Post #1048279 10th Oct 2024 5:03pm
View user's profile Send private message View poster's gallery Reply with quote
Linds Hanson



Member Since: 16 Jan 2021
Location: Cornwall
Posts: 492
United Kingdom 
Be careful those thick brown wires are live + feeds to the fuse box.
Post #1048379 11th Oct 2024 3:52pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6638
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
Correct - NOT ground wires!!  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #1048385 11th Oct 2024 4:51pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Tandy



Member Since: 14 May 2024
Location: WA State
Posts: 18
United States 
Thank you for the clarification.

The battery was removed a few days prior.
Post #1048395 11th Oct 2024 5:22pm
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1674
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
Yes live feed from battery positive. Be careful tightening them back up as it’s easy to strip the nut/damage the housing. Just little more than hand tight
Post #1048406 11th Oct 2024 7:11pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums