DEFENDER2.NET - View topic - Puma 2.2 throttle issues

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma 2.2 throttle issues

Page 1 of 1

Print this entire topic ·

CornishLandys101

Member Since: 27 Jul 2024
Location: cornwall
Posts: 2

2014 Defender 110 Puma 2.2 XS CSW Fuji White

Puma 2.2 throttle issues

Good day, I have an issue which was very intermittent but recently has been happening every drive.

The Landy is going into limp mode with throttle position sensor/ switch D/E voltage correction. P2138
and the ABS light coming on with a fault.

It seems to happen at low speed mainly and it has only happened when moving forward I don't know if that's related to anything I cant seem to get it to fault when moving the harness so I think that's good.
so now I'm assuming its either the throttle its self or the ecu? are there any other things it could be?

my old TD5 had the same issue and that was a cut on the wiring harness which I fixed easily once I found it, I don't want to spend £190 on a new throttle if its not that, the ecu date says 14/6/18 in the corner is that suspect?

ill attach a picture of my ecu if someone knows where the throttle wires in on which plug that would be great.
Thanks for any help.

27th Jul 2024 8:24am

andy63

Member Since: 30 Jun 2023
Location: north east
Posts: 497

Hi.. Each potentiometer on the acc pedal will have it's own supply and earth along with a signal wire who's voltage varies as you depress the pedal.. All need checking to verify or confirm the fault code as been due to a faulty unit..
If the abs light is on there should be a code for abs, which a generic obd reader won't see..
Check the function of the two brake pedal operated switches.. One does put a supply to the abs control module, but ideally you would check for the generated code with a suitable tool..

27th Jul 2024 11:14am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20282

There does seem to be a bit of a pattern with this with 2.2’s, I seem to remember similar issues of this nature with three or four posters on here in the last couple of years. ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

27th Jul 2024 12:30pm

CornishLandys101

Member Since: 27 Jul 2024
Location: cornwall
Posts: 2

cheers genets appreciate it I'm great mechanically but the electronics might be a bit to much and a Landy specialists job, I'm goanna swap my dads throttle pedal from a 2.4 over it seems ok for now.

do you know what people with this issue before have done to resolve it?

27th Jul 2024 2:41pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20282

If you use the search function on the above bar you should be able to find some info I would imagine from other posts.

Also welcome to the site.

You will find it a nice place to be a very informative.

⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

27th Jul 2024 4:55pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum