DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > MAF Sensor

Page 1 of 1

Print this entire topic ·

vipergreen

Member Since: 06 Jul 2023
Location: Herts
Posts: 7

MAF Sensor

Ok I need some educating.

I’ve had a long standing black smoke issue which I am finally addressing.

I’ve just changed my Intercooler and the smoke reduced,,, a bit.

Nanocom says at idle the MAF is about 45, so I think a bit on the low side. Floor it whilst stationary and it jumps to about 330 then settles down to about 280.

Pulling the plug on the MAF seemed to give a bit less smoke.

I removed the MAF completely and no smoke.

So maybe I’m stupid but can I simply delete the MAF by extending the hose to the air filter ?

The EGR has already been deleted.

Thanks

2nd Apr 2024 5:42pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1620

You should have about 60 kg/hr at idle. Get a good quality MAF sensor (beware eBay fakes in genuine boxes and aftermarket junk] and try cleaning the MAP.

https://bellautoservices.co.uk/store/td5-air-flow-meter/ Available here and how to test it too.

3rd Apr 2024 12:55am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum