DEFENDER2.NET - View topic - Rivet part numbers

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Rivet part numbers

Page 1 of 1

Print this entire topic ·

lakes

Member Since: 08 Jan 2023
Location: Lake District
Posts: 22

2010 Defender 90 Puma 2.4 XS CSW Santorini Black

Rivet part numbers

I’m looking to replace the rear bracket with 6 rivets in and also rivet a couple of holes from light guard rivnuts and old badges etc.

Can anyone advise on what rivets to use in the cappings and the holes? They will be being painted over.

I have already ordered RU612253 but on double checking I believe LR031461 is correct but don’t appear to be fully aluminium.

Is full aluminium the way to go?

Who knew a rivet could be so confusing!

Click image to enlarge

19th Mar 2024 5:25pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1628

You want what’s called a closed/sealed head rivet for them, eBay would be the place to look

steel rivets are a lot harder to do without a decent tool. If they are to replace those screws in you panels I’d go for all aluminium there not just the head.

19th Mar 2024 10:10pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 623

2007 Defender 90 Puma 2.4 HT Aintree Green

The vehicle is built with these alloy sealed rivets with steel shanks - (standard rivet gun is fine)
You can’t get full aluminium pop rivets, the shanks need to be steel.

https://www.ebay.co.uk/itm/182531559658?mk...media=COPY

I think it is 14mm length for the cappings as top two pass through a coupe of layers.

For filling rear holes use the shortest length available.

20th Mar 2024 1:17am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20418

Bear in mind head designs vary a little, they aren’t just standard rivets.

I seem to remember Britpart was the OEM supplier, the head is round conical and not domed like many generic rivets. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

20th Mar 2024 10:51am

jcw

Member Since: 11 Sep 2016
Location: Gloucestershire
Posts: 168

2007 Defender 90 Puma 2.4 HT Stornoway Grey

I’ve bought genuine LR031461 rivets for exactly the same purpose of filling some random holes in the rear bodywork.

I can’t remember what they cost but they weren’t much - ordered from Duckworth LR with free P&P.

Here’s what they look like - do appear to be an aluminium head with steel pin

Click image to enlarge

20th Mar 2024 11:12am

BrickBox

Member Since: 05 Oct 2021
Location: Wales
Posts: 833

2008 Defender 110 Puma 2.4 USW Zermatt Silver

https://parts.jaguarlandroverclassic.com/lr031461-rivet.html 2008 2.4 110 Utility Station Wagon XS.

20th Mar 2024 1:30pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17427

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

People will pay nearly £1 PER RIVET !

Crikey. They should only be pennies each, there is nothing special about them. Go to a fastener specialist.

20th Mar 2024 1:57pm

Waka56

Member Since: 08 Nov 2023
Location: Hamburg
Posts: 162

I see some britpart for 20pi

Making my Defender great again. (Or trying to at least xD)

20th Mar 2024 6:22pm

piechipsandpeas

Member Since: 12 May 2021
Location: Albany, Western Australia
Posts: 214

2013 Defender 110 Puma 2.2 SW Indus Silver

blackwolf wrote:
People will pay nearly £1 PER RIVET !

Crikey. They should only be pennies each, there is nothing special about them. Go to a fastener specialist.

But it does come individually wrapped in its own branded plastic bag

21st Mar 2024 1:23pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum