 | Home > Technical > front bumper replacement |
 
|
|
|
| kenzle8a Member Since: 12 Feb 2020 Location: None Posts: 1074  
|
Don't get a britpart one.
I did... I'm going to go for one of these to replace it. https://www.devon4x4.com/defender-d44-club...ndard.html |
||
24th Apr 2022 11:07am |
|
| Iansy110 Member Since: 16 Nov 2020 Location: Inverclyde Posts: 8  
|
I purchased a take off original bumper from LRI Solutions almost seven years ago.Liberal amounts of dinitrol inside and wipe over front with ACF50 and still in good nick.
Cheers |
||
|
24th Apr 2022 11:48am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 
|
If you're just looking for a standard bumper then you can't go wrong with the galvanised version available from Paddocks for £72.
https://www.paddockspares.com/dpb104270gal...-caps.html I bought one and painted it black:  Click image to enlarge More details here: https://www.defender2.net/forum/post729132.html#729132 Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
24th Apr 2022 11:55am |
|
| Dinnu Member Since: 24 Dec 2019 Location: Lija Posts: 3421  
|
I have a galvanized one from Paddock.... tha galvanizing is quite thick, too thick at certain location, but for the price I paid i do not complain. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black |
||
|
24th Apr 2022 12:32pm |
|
| nitram17 Member Since: 08 Jun 2014 Location: newcastle Posts: 2261 |
Im flabbergasted !!! A replacement part for a defender that looks good ,does the job and moreover is "reasonably priced" I think there must be a small tear in the fabric of the universe nothing else could explain this strange phenomena!  |
||
|
24th Apr 2022 3:36pm |
|
| nitram17 Member Since: 08 Jun 2014 Location: newcastle Posts: 2261 |
ORE have a new bumper out https://ore4x4.co.uk/shop/ore/ore-defender-standard-bumper/
|
||
|
24th Apr 2022 3:45pm |
|
| Intercept Member Since: 27 Feb 2017 Location: Suffolk Posts: 587 
|
Having had a cheap one last only 3 years I opted for one of these https://uproar4x4.com/products/land-rover-...8325905461 Far from cheap but excellent quality.
|
||
|
24th Apr 2022 8:03pm |
|
| I Like Old Skool Member Since: 23 Feb 2015 Location: Manchester Posts: 814 
|
Galv FTW. Once it has weathered in and developed the flakey pattern they look great (And much 'harder' than those poncey black ones).
Click image to enlarge |
||
|
24th Apr 2022 8:22pm |
|
| Mo Murphy Member Since: 01 Jun 2008 Location: Letchworth Garden City, Herts Posts: 2244 
|
I'd echo LRAs recommendation ! My galv one from Paddocks is 12 years old and still looking good and rust free.
Mo The Land Rover 90 - Many are called, few are chosen. 50 Shades of Pennine Grey |
||
|
24th Apr 2022 9:27pm |
|
| carpetsauce Member Since: 19 Mar 2021 Location: Essex Posts: 58
|
Anyone know who supplies a front bumper that is strong enough to take a towhook flange? I need it to manoeuvre boat trailers. I'd like the replacement to have the letterbox shaped LED slots so I can swop them from my existing bumper. Grateful for any ideas of suppliers, thanks.
|
||
|
25th Apr 2022 9:03am |
|
| Intercept Member Since: 27 Feb 2017 Location: Suffolk Posts: 587
|
I have this NATO ring compatible pin hitch on my Uproar front bumper for Sankey manoeuvring. I've put a stiffener plate inside to spread the load, but I suspect it'd be just fine for shunting with just thick M12 washers.
Uproar also do versions with DRLs: https://uproar4x4.com/collections/stainless-steel-front-bumpers. Click image to enlarge |
||
|
25th Apr 2022 9:31am |
|
| Dinnu Member Since: 24 Dec 2019 Location: Lija Posts: 3421
|
I have used the standard bumper for my 2 ton boat, but mostly on flat surface. My trailer has quite some tongue weight. I have also pulled in reverse a 1.5ton up a very steep incline (maybe up by 5ft in 14ft length) but the bumper was not so happy after that. But then increased the size of the load spreader (6mm steel plate that fits snugly in height) behind the bumper, and no further issues. Make sure your dumb irons are solid. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing 2012 90 CSW, 2.2TDCI, Santorini Black |
||
|
25th Apr 2022 10:39am |
|
| strang Member Since: 16 May 2012 Location: Happy Valley Posts: 1381 
|
I have just bought a galv bumper for my 59 plate Puma, which will make it the fourth bumper its had, as the last three have gone rusty. I was going to leave it galv, rather than paint it for a change of look. Euro-Leafing to infinity and beyond.....
|
||
|
26th Apr 2022 6:00pm |
|
| MercianRover Member Since: 07 Apr 2022 Location: Culworth Posts: 141 
|
Where did you get that pin hitch from - agricultural supplier? |
||
|
27th Apr 2022 6:50am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
