↓ Advertise on Defender2 ↓

Home > Td5 > TD5 Belt buckle
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
doruk1981



Member Since: 15 Aug 2022
Location: Aargau
Posts: 100
Switzerland 2002 Defender 110 Td5 SW Coniston Green
TD5 Belt buckle
Hi,

My TD5 (2002)s belt buckle covers/casings are disintegrated and I'd assume, MOT/TüV/CH equivalent would like to see a complete set installed instead of the broken ones. As the car is still on the lift, replacing these would be at the moment an easy one. I note that the TD5 belt buckles (EVL104360 / 70) are the ones with the metal frame that goes below the seat rails. However when googling for parts, I note the long "holmed" ones (for example BTR4373) are also mentioned to fit?


I am going to order the TD5 ones but was curious to understand how much these are swappable? This also as the TD5 units are around 100 pound while the non TD5 units are around 50-70. Sometimes it feels like the TD5 parts are more expensive than the non-TD5 or Pumas

After finishing the front I'll also need to deal with the second row seatbelts .. but that a moment later

Thanks for sharing your insights. Td5 110 Station
Post #987443 31st Mar 2023 10:31am
View user's profile Send private message View poster's gallery Reply with quote
TexasRover



Member Since: 24 Nov 2022
Location: Paris
Posts: 1051
France 2002 Defender 110 Td5 DCPU Chawton White
The large brackets (EVL104360) incorporate the 2 point lap belt for the center seat. Maybe that option (not the safest) was later removed?

The larger bracket as two mounting holes, but only one has back nut while the other is just a through hole (bolt and nut required). When I changed my bracket for the same reason there was only one bolt and I added the additional bolt-nut for good measure.

Both are approved so I would think both would be allowed by your average OCD local Swiss Tester.
Post #987450 31st Mar 2023 12:19pm
View user's profile Send private message View poster's gallery Reply with quote
sb86M90



Member Since: 09 Jun 2023
Location: Leeds
Posts: 1
United Kingdom 2003 Defender 90 Td5 CSW Java Black
Quote:
The larger bracket as two mounting holes, but only one has back nut while the other is just a through hole (bolt and nut required). When I changed my bracket for the same reason there was only one bolt and I added the additional bolt-nut for good measure.


Which bolts did you use? I am needing to replace my brackets and both bolts - ebay has plenty of brackets but they are all boltless!
Post #996366 15th Jun 2023 11:15am
View user's profile Send private message View poster's gallery Reply with quote
TexasRover



Member Since: 24 Nov 2022
Location: Paris
Posts: 1051
France 2002 Defender 110 Td5 DCPU Chawton White
I used the same size bolt from my extensive defender bolt and nut collection. The new bracket came with one bolt that threads into a captive nut. M10 I recall. The hole is already there in the bracket and seatbox so it was a 2 min job.
Post #996377 15th Jun 2023 12:20pm
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1624
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
Yeah M10 normally flange head bolt with a 15mm hex though. These tend to have thread locker on them so can be tight to get off.
Post #996393 15th Jun 2023 4:20pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums