↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Heater Fan 2.4
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
The Monkey



Member Since: 11 Aug 2013
Location: Meath
Posts: 63
Ireland 
Heater Fan 2.4
Evening all, my heater fan works on positions 1,2 but nothing on setting 3. Any ideas as to what might be the cause of it.
Thanks.
Post #993055 17th May 2023 9:34pm
View user's profile Send private message View poster's gallery Reply with quote
HardCharger



Member Since: 03 Mar 2013
Location: Manila
Posts: 729
Philippines 2011 Defender 110 Puma 2.4 SW Stornoway Grey
The third position probably burned out.

This happened to me and the third position was burned out. Luckily, my electrician was able to resurrect it and it's still working until now. If he wasn't able to make it work, you need a new assembly.

I asked a friend of mine who has a Landy shop, he suggested wiring relays to each switch position to take the load. I told him to install them on mine, now I can use all three positions confidently. If one of them stops working, all I have to do is replace the corresponding relay.

I hope this helps you.
Post #993070 18th May 2023 3:04am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums