↓ Advertise on Defender2 ↓

Home > Off Topic > Makita Impact - DTW1002
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
SJM2018



Member Since: 06 Jul 2018
Location: Bristol
Posts: 296
United Kingdom 2011 Defender 90 Puma 2.4 XS CSW Aintree Green
Makita Impact - DTW1002
I just want to profess my love for this tool.

Replaced my A Frame pivot / fulcrum over the weekend, something I was dreading as I've heard the horror stores of trying to get it unbolted.

Opted for the Britpart 'genuine' assembly DA1129G - which to be fair was actually pretty decent.

Anyway, the alledged 1,600 nm of nut busting torque made replacing the fulcrum a piece of cake.

Drilled the long end off the split pin, so I could fit a socket of the castellated nut, hammered on the socket, added a universal joint and an extender, and then the just smashed off the nut, without removing the split pin.

All in, took me about 30 mins to remove and replace.

It's an expensive tool, but the money I've saved / will save on labour, pays for itself! 2011 CSW XS 90
Post #991819 8th May 2023 9:33am
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5724
2006 Defender 110 Td5 USW Zermatt Silver
There are Makita impacts and there are makita impacts. (Nut gun)

Sounds like you’ve got a good one. Mine is Censored , no power to it at all. Mine is 1/2” drive, don’t know model number, and at the time of buying was the only one instock. Always regretted buying it, and have seen others on youtube using Makita ones with success, so think the moral of my story is don’t just buy any Makita nut gun. Do research and buy a good one.
Post #991822 8th May 2023 10:39am
View user's profile Send private message View poster's gallery Reply with quote
Ianh



Member Since: 17 Sep 2018
Location: Essex
Posts: 2028
United Kingdom 
My 18v 1/2 inch Milwaukee impact wrench has paid for itself many times over on various vehicles including large stubborn nuts/bolts in awkward locations.
Having multiple torque settings comes in handy , especially with smaller fixings, as you can start at the lower setting and work your way up, thus reducing the risk of sheering a bolt.
I still clean threads and soak in penetrating oil such as plus gas and so far have always managed to remove every nut and bolt with relative ease, in particular ones that just felt they were going to shear when using a breaker bar.
Post #991826 8th May 2023 11:33am
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17435
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
My 1" Milwaukee has broken things I didn't even think were breakable! Rolling with laughter
Post #991838 8th May 2023 1:25pm
View user's profile Send private message View poster's gallery Reply with quote
John P



Member Since: 26 Dec 2013
Location: West Sussex
Posts: 322
United Kingdom 2012 Defender 90 Puma 2.2 SW Corris Grey
Yes I have the DTW1001, and what a fantastic bit of kit. Thumbs Up
Post #991857 8th May 2023 4:24pm
View user's profile Send private message View poster's gallery Reply with quote
TamarBlue11



Member Since: 25 Sep 2020
Location: England
Posts: 226
United Kingdom 2011 Defender 90 Puma 2.4 HT Tamar Blue
I have the Dewalt equivalent and always been impressed with what it can remove.
Post #992450 13th May 2023 7:44am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums