↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > 3D Printed stuff!
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Mossberg



Member Since: 29 Feb 2020
Location: Lancs
Posts: 553
United Kingdom 1993 Defender 90 300 Tdi HT Aintree Green
3D Printed stuff!
I have managed to get myself a 3D printer and would like to print some things that will hopefully be OK for the Defender. I got it on a bit of a whim so didn't really have anything in mind, so now I am looking at stuff to print.

So have you folks printed stuff for your vehicle or indeed other related items.

My thoughts are:

Parts for inside - the dash, centre console, switch and gauge housings, in the back and tub areas and on doors etc.

Exterior parts such as trim pieces, light surrounds, on the bodywork/bumpers etc.

Underneath and inside the engine bay. Thinking of things like caps and bungs, brackets and clips, etc.

Tools. Things to help seat seals etc.

Toolbox and garage. Storage solutions, specific tool storage or gear tidies etc.

It would be good to know what you have done, if it's been successful and indeed if its been unsuccessful as that may save it lot of grief in repeating things that don't work.

Is there anywhere that shares files for prints? It seems pointless trying to design and draw something that has already been successfully done.

I don't want the printer sitting idle, especially as I don't have a particular project in mind.

Things I'm am currently thinking of doing are;

Caps over the bumper fixings.

Bungs for where the wiring loom came out of the chassis.

Mobile phone support to fit into the ashtray area on the dash.

The centre panel on the dash (the one with the cigarette lighter socket and wiper switch) to include extra items.

Looking forward to seeing what you have done.

ATB.

Mick
Post #977670 12th Jan 2023 6:21am
View user's profile Send private message View poster's gallery Reply with quote
Hairy Dan



Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1414
United Kingdom 1998 Defender 90 V8 Petrol 50th Auto Chawton White
Have a look at Thingiverse, loads of stuff to print although not a lot aimed at Defenders Thumbs Up

https://www.thingiverse.com/search?q=defen...t=relevant Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8
Post #977822 12th Jan 2023 10:56pm
View user's profile Send private message View poster's gallery Reply with quote
AMBxx



Member Since: 24 Jul 2016
Location: York
Posts: 1031
United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Orkney Grey
What about printing replacement corner cappings for the rear corners? They've no structural need, just cover up the join between two panels. Always go rusty, so a plastic replacement would be ideal. I think you'd need to use plastic plugs to hold them in place as rivets would break the plastic.
Plain black would be ideal.
Am I missing something silly?
Post #977956 14th Jan 2023 7:45am
View user's profile Send private message View poster's gallery Reply with quote
strang



Member Since: 16 May 2012
Location: Happy Valley
Posts: 1380
United Kingdom 2009 Defender 90 Puma 2.4 XS CSW Galway Green
Print yourself a series one!

https://www.thingiverse.com/thing:3750406 Euro-Leafing to infinity and beyond.....
Post #977994 14th Jan 2023 1:56pm
View user's profile Send private message View poster's gallery Reply with quote
tooth_dr



Member Since: 26 May 2021
Location: Northern Ireland
Posts: 236
Northern Ireland 
Got into 3D printed about 3 years ago and learnt how to design stuff in Fusion 360. To get the most from your printer I would strongly suggest learning to design yourself. Thingiverse is ok, but designing a solution yourself is more rewarding.
I haven’t printed anything for the defender but have printed a battery cover for my other car amongst other things
Post #978003 14th Jan 2023 2:41pm
View user's profile Send private message View poster's gallery Reply with quote
Mossberg



Member Since: 29 Feb 2020
Location: Lancs
Posts: 553
United Kingdom 1993 Defender 90 300 Tdi HT Aintree Green
Totally agree with this. If I just wanted to print other peoples items then its probably easier and more reliable just to buy that stuff.

I enjoy designing stuff, I used to do it with sheet metal all the time (was my job) - but that was 2D and folded. Learning 3D is going to be the aim, then I will be happily doing my own stuff, though I am not against using other peoples designs (with their consent).

However, as I now have the printer it would seem silly having it then not using it to the max. I have bought lots of the little parts for Defender fixings and why buy those parts in future if they can be made as strong and cheaper on my printer than buying from China through a re-seller?
Post #978005 14th Jan 2023 3:00pm
View user's profile Send private message View poster's gallery Reply with quote
rallysteve



Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2227
United Kingdom 2002 Defender 110 Td5 DCPU Keswick Green
Or bigger/better:
https://3dsets.com/product-category/3dprin...x4-lineup/ 02' 110 TD5 Double Cab Rebuild Thread
Post #978025 14th Jan 2023 4:51pm
View user's profile Send private message View poster's gallery Reply with quote
Niels906



Member Since: 04 Jul 2020
Location: Bussum
Posts: 44
Netherlands 
are you able to 3d print a gear stick knob?
Post #983798 26th Feb 2023 7:51pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums