DEFENDER2.NET - View topic - Existing work light switch feed

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Existing work light switch feed

Page 1 of 1

Print this entire topic ·

stew 46

Member Since: 26 Jan 2012
Location: Wadebridge ,cornwall .
Posts: 561

2010 Defender 110 Puma 2.4 USW Bonatti Grey

Existing work light switch feed

Hi all , my defender 2011 had a rear work light fitted when I bought her and it has never worked , I’ve been trying to trace the wires from the switch to the fuse but I’m struggling to find where they go , not sure if it’s an optional extra on a puma as there is also a switch in the rear for the light so thinking it’s a 2 was system ? , any one also have this ? , here is a pic of the front switch , rear switch is the same .

Click image to enlarge

🥟 stew

16th Jan 2023 2:30pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17368

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Totally aftermarket, I'm afraid, so you'll have to trace them the traditional way by taking things apart and looking.

16th Jan 2023 3:07pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6092

^^^^ I don't know.... that could be a Friday afternoon Speial Vehicles addition!

16th Jan 2023 4:44pm

Penfold_6290

Member Since: 22 Sep 2021
Location: Dorset
Posts: 317

So good of Land Rover to leave the choke hole in place after all these years as a convenient place to fit a switch.

As far as the rear work light is concerned it'll be a case of trace the wires, I'd start at the light and work forward as you have 2 switches.

17th Jan 2023 3:18pm

nicolas0505

Member Since: 23 Dec 2020
Location: briançon
Posts: 79

You should do a continuity test with a multimeter.

17th Jan 2023 3:43pm

stew 46

Member Since: 26 Jan 2012
Location: Wadebridge ,cornwall .
Posts: 561

I’ll try and trace the wires from the switch as there’s no feed getting to them , if no luck I’ll fit a new small fuse box under the front seat and start from scratch

But suffering from a man cold at the moment and feeling like 💩💩💩

17th Jan 2023 3:58pm

TexasRover

Member Since: 24 Nov 2022
Location: Paris
Posts: 1046

2002 Defender 110 Td5 DCPU Chawton White

Penfold_6290 wrote:
So good of Land Rover to leave the choke hole in place after all these years as a convenient place to fit a switch.

As far as the rear work light is concerned it'll be a case of trace the wires, I'd start at the light and work forward as you have 2 switches.

Yes I was wondering the same. There is a rubber plug for that hole, but last time a defender had a choke fitted must have been 1991? Never changed the injection molding...you think that be cheaper than making and fitting a plug instead

17th Jan 2023 6:09pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum