DEFENDER2.NET - View topic - TD5 new cylinder head on standalone block with

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 new cylinder head on standalone block with

Page 1 of 1

Print this entire topic ·

alexatnd

Member Since: 19 May 2015
Location: Yorkshire
Posts: 278

TD5 new cylinder head on standalone block with

Hi, found lots of articles on how to safely remove and refit a td5 cylinder head from a timing point of view, but non on how to fit a new head onto a block

I have a complete spare td5 engine in the garage. my running TD5 needs a new cylinder head, so the local garage removed the head of the spare engine and fitted that. They then just bolted the old head to the block without doing any timing ( They were replacing the injector seals and all the bolts holding the rocker arm shaft on ( if thats what its called on a diesel) sheared. Sp from that point of view no point in setting the timing

So basically I've got a block. Can find no 1 cylinder TDC o.k. with head offand put the (botom) lock pin in, but if /when i get a new cylinder head, how do i line that up timing wise ?
A Santa - 1977 Series 3 - new chassis, tub, disc brakes,SU Carb
Gertie - 1999 110 TD5 - like a Phoenix from the ashes back on road... almost
Effie - 2004 110 TD5 County

27th May 2022 3:40pm

htb2

Member Since: 02 Nov 2018
Location: Carmarthenshire
Posts: 531

There is a slot in the camshaft to insert a timing pin in at the correct place, ie No 1 at TDC

27th May 2022 7:00pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum