Home > Technical > No power to reverse lamp- assume reverse switch needed? |
|
|
Screbble Member Since: 26 Apr 2015 Location: Lancashire Posts: 2105 |
I’ve never had that problem myself but have read many threads on here that suggests it’s reasonably common. Some good guidance on here on how to get at the pesky switch
|
||
27th Mar 2022 7:57am |
|
Mo Murphy Member Since: 01 Jun 2008 Location: Letchworth Garden City, Herts Posts: 2244 |
Check the pins in the connector to the back of the lamp, they can rust to nothing.
Mo The Land Rover 90 - Many are called, few are chosen. 50 Shades of Pennine Grey |
||
27th Mar 2022 2:30pm |
|
spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4702 |
The fuse is clearly marked on the pull down flap. Mine is a 2.4 so I do not know whether your fuse is in the same place as mine but the hand book has a page with the fuses and their locations. Iwould physically remove the fuse and replace it to see if that was at fault.
I had an issue with my reverse light and here is how it was finally sorted. https://www.defender2.net/forum/topic81961.html 1982 88" 2.25 diesel 1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
1st Apr 2022 7:13pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis