DEFENDER2.NET - View topic - Connectors for Winch Power Cables

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Connectors for Winch Power Cables

Page 1 of 1

Print this entire topic ·

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

Connectors for Winch Power Cables

I am investigating options for connectors for 40sqmm cable for winch power and earth so I can remove the winch without unbolting from either battery or winch end. Clearly an Anderson connector is an option but I am looking for a single pole option with a smaller plug (for passing through holes).

Has anyone used welding cable connectors? Like these:

Click image to enlarge

Twist lock and copper connectors so should give decent current pass through and they are rated for larger cables (up to 95sqmm).

https://www.1stopweldingshop.com/Catalogue...Type-Plugs

10th Sep 2021 10:42am

Horneteer

Member Since: 10 Feb 2015
Location: Cornwall
Posts: 60

Hi bodstruck,

I've mounted my winch in a bracket that plugs into a receiver hitch, so I've been using an Anderson connector (SB-350, 350A) under the bonnet (it's also useful for jump starting). The winch is only mounted on the 90 when I'm using it as it obscures the number plate, so opening the bonnet to plug it in is no problem.

The welding Dinse plugs should be fine, just use the correct size for your cable. I have them on my mig welder and have no problems, but then they are not left permanently connected.

12th Sep 2021 2:08pm

Tim2809

Member Since: 15 Aug 2021
Location: Dorset
Posts: 21

Have used din plugs for years on recovery vehicles for the winch, we then also use same supply for jump leads so double purpose

12th Sep 2021 2:50pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum