![]() | Home > Puma (Tdci) > Will crank, won't start |
![]() ![]() |
|
|
Badger110 Member Since: 06 Feb 2018 Location: South hams Posts: 1039 ![]() ![]() ![]() |
Whereabouts in Devon are you?
|
||
![]() |
|
The Gudgeon Member Since: 18 Jul 2021 Location: Devon Posts: 2 ![]() ![]() ![]() |
Near Tavy, I ran the Bearmach diagnostic tool on it today and there were no codes. It showed that I had 65000kPa on the fuel rail and I am led to believe that you should see a minimum of 54k. So it appears not to be a fuel problem. As the clutch was recently changed I've ordered a crank position sensor which I'll fit tomorrow. At this point I am out of my depth as if the cps is sending the correct signal to the ECU where do you go from here? any comment would be appreciated. Update, I removed and refitted the original CPS and it started first time.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
