↓ Advertise on Defender2 ↓

Home > Td5 > Rear step model
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
TafkaP



Member Since: 05 Jan 2021
Location: edinburgh
Posts: 8

United Kingdom 
Rear step model

Click image to enlarge

Does anyone know what rear step this is? Looking to get a stainless steel bolt set for it. Or black anodised.

Any advice be appreciated.
Post #885995 16th Feb 2021 10:12pm
View user's profile Send private message View poster's gallery Reply with quote
Adammacky



Member Since: 28 Dec 2019
Location: West Midlands
Posts: 309

United Kingdom 
NAS rear step and tow bar
Post #886007 16th Feb 2021 10:38pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

United Kingdom 
It looks like a standard LR NAS step but there are several different ones available from different manufacturers and they're all very similar.

Is it one that you own or a specific one that you want to buy?

You should probably be aware that if you're planning to use it as a tow bar then stainless bolts are not recommended because of their particular properties. Plated or even galvanised steel would be a better bet. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #886055 17th Feb 2021 8:51am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3414

Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
As above ^^^^. Ideally grade 10.9. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #886157 17th Feb 2021 5:57pm
View user's profile Send private message View poster's gallery Reply with quote
TafkaP



Member Since: 05 Jan 2021
Location: edinburgh
Posts: 8

United Kingdom 
Thanks. It’s already fitted came with it. Think it was only fitted in November with new rear cross member.

Can grab some 10.9s out work easy enough. Might just paint them.


Most it will take on tow bar is a bike rack. Hoping as the step pulls bar out futher rom spare I will be able to fit a rack with no hassle.
Post #886224 17th Feb 2021 10:26pm
View user's profile Send private message View poster's gallery Reply with quote
donmacn



Member Since: 06 Nov 2017
Location: Nth Scotland
Posts: 1841

 
I have one of these NAS steps, and a 265/75 tyre on the spare.

I still need to use an offset bike carrier to clear the spare wheel. I have one of these: https://www.maxxraxx.co.uk/bikes-racks/exp...le-carrier

My wheel is mounted to a swingaway carrier, rather than directly onto a door mount, but even still I don't think a vertical carrier will fit. Donald

1994 Defender 300Tdi 110 SW - owned since 2002 - 230k miles and going strong
(The 'rolling restoration' or tinkering thread: http://www.defender2.net/forum/topic58538.html )
2000 Range Rover P38 4.0L V8

in the past..
RR classic - fitted with 200Tdi
1984 RR classic - V8 with ZF auto box
1993 Discovery 300Tdi

not to mention the minis and the Type 2 VW camper...
Post #886260 18th Feb 2021 9:44am
View user's profile Send private message View poster's gallery Reply with quote
TafkaP



Member Since: 05 Jan 2021
Location: edinburgh
Posts: 8

United Kingdom 
Mines is on a swing away too. Guess I’ll need to look at the maxis then. Cheers
Post #886361 18th Feb 2021 5:28pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums