DEFENDER2.NET - View topic - New dash install

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > New dash install

Page 1 of 1

Print this entire topic ·

V8Smith

Member Since: 18 Apr 2017
Location: Cuckfield
Posts: 22

New dash install

Hi all, I’ve a puma 110 and Ive purchased A new centre dash that allows a double din unit. Tried fitting today and need to extend a few wires which is fine, but looks like the bottom of the clock is stopping the top air vent part sitting correctly.

Anyone done this and can give advice as to what to do or tips to help get it in correctly.-

Thanks

Mike

17th Sep 2020 3:27pm

PCM

Member Since: 25 Jan 2019
Location: North East
Posts: 874

If you have a full depth Double din head unit, I found that you need to use a heat gun to 'squish' the air vents by about 5mm to allow it to seat properly. Not a big job but a pain. Hence the reason most go for the half depth units.
Others had already found this out before I did.

https://www.defender2.net/forum/topic54225-30.html

Good luck

18th Sep 2020 4:21am

Stiff1

Member Since: 09 Dec 2014
Location: Cornwall
Posts: 597

2007 Defender 110 Puma 2.4 XS CSW Java Black

You need to cut the bottom edge off the white housing of the clock.

19th Sep 2020 8:58am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum