Home > Off Topic > Who ties down a vehicle like this? |
|
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
https://www.autoexpress.co.uk/jaguar/10733...first-time OK, it might just be me, but really what sort of numpty secures a vehicle on a trailer like that? I wonder if it was in the UK, the DVLA might stop them and have a word? |
||
15th Jan 2020 3:06pm |
|
X4SKP Member Since: 29 Nov 2013 Location: Berkshire Posts: 2295 |
One loop of a spoke...It'll be fine
I hope they also put the vehicle in park or 1st gear and applied the handbrake before jamming the loose straps in the door... SKIP https://www.defender2.net/forum/topic83242.html |
||
15th Jan 2020 3:29pm |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4785 |
I've got to be honest, I'd rather see that than other attempts I've seen. (I once saw a classic mini tied around the front and rear bumpers)
They obviously don't have the proper tyre straps so have done the next best thing. At least they've tied it to the wheels and not the body 2002 90 Td5 Station Wagon 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
15th Jan 2020 3:30pm |
|
markb110 Member Since: 22 May 2010 Location: Guildford Posts: 2641 |
And there's me thinking that they had run out of superglue......
|
||
15th Jan 2020 3:43pm |
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
We need photos... |
||
15th Jan 2020 5:58pm |
|
22900013A Member Since: 23 Dec 2010 Location: Oxfordshire Posts: 3149 |
Easy enough to wrap around the tyre in a loop 🤦♂️ 2011 110 USW
1973 Series III 1-Ton 1972 Series III 1-Ton Cherrypicker 1969 IIA 1-Ton 1966 IIA 88" |
||
15th Jan 2020 6:14pm |
|
Bluest Member Since: 23 Apr 2016 Location: Lancashire Posts: 4212 |
Using the power of positive thinking... This is actually JLR being very thorough and testing if the wheel can withstand how the car will actually be secured by your local backstreet bodyshop on their overloaded 2003 3.5t transit. Bit like how they ram them into curb and jump over speed bumps in the development process. 2007 110 TDCi Station Wagon XS
|
||
15th Jan 2020 6:24pm |
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
Do you mean like this? |
||
15th Jan 2020 6:52pm |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8045 |
Off readers and comp trucks I have always strapped the body and pulled it down until bump stop is contacted. Works for me. Less mass moving around than if just strapped on wheels. Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
15th Jan 2020 7:56pm |
|
Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6608 |
What happens in Arjeplog.... gets captured by 1000 spy photographers.
Although they never spotted me in a snowy ditch in a development car 1988 90 Td5 NAS soft top 2015 D90 XS SW |
||
15th Jan 2020 9:04pm |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4785 |
Unfortunately I was driving, on the M5 I don't think the chrome bumpers of a classic mini are the official tie down points 2002 90 Td5 Station Wagon 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
15th Jan 2020 9:07pm |
|
22900013A Member Since: 23 Dec 2010 Location: Oxfordshire Posts: 3149 |
No, there is a better way. You can put a loop around the tyre and then the ends of the strap go in the usual places. It's a bit of an emergency measure but does work. 2011 110 USW 1973 Series III 1-Ton 1972 Series III 1-Ton Cherrypicker 1969 IIA 1-Ton 1966 IIA 88" |
||
16th Jan 2020 6:32am |
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
I think belly-wrapping
, if that is what you are describing, requires tensioning on both ends to meet best practice standards. Noted you reference emergency measures. |
||
16th Jan 2020 7:17am |
|
Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 |
Now that needs a photo too! At the very least a few addional words... |
||
16th Jan 2020 7:23am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis