 | Home > Maintenance & Modifications > Load area wheel arch covering |
 
|
|
|
I have just bought a my 2014 puma utility and there was some trim/carpet that would have covered the rear /side windows and the wheel arch area but some kind gentleman sold them before I got it and left velcro behind, what do I need to put this right?
| LCJ Member Since: 07 Sep 2009 Location: UK Posts: 201  |
The wheel boxes and load bay could have been covered in carpet or heavy duty vinyl - it varies depending on trim level. While yours is bare you might do well to get some sound deadening on it such as dynamat, as the wheel boxes are noisy, particularly with spray off the road. Then cover with your choice of material!
The sides above the waistline i.e. flat panels came uncovered from the factory, but the Mud Stuff panels are a great addition for practicality and again sound deadening (add either dynamat or the foam the panels are supplied) with before fitting the panels to stop the sheet metal reverberating. https://www.mudstuff.co.uk/products/mud-st...panel.html |
||
3rd Mar 2020 5:50pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 
|
I kitted out the back of my USW with sound insulation and carpet:
 Click image to enlarge Click image to enlarge Click image to enlarge More details here: https://www.defender2.net/forum/post711655.html#711655 And here: https://www.defender2.net/forum/post769393.html#769393 Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
3rd Mar 2020 9:19pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
