DEFENDER2.NET - View topic - Oil Temp Sender Thread size? Puma

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Oil Temp Sender Thread size? Puma

Page 1 of 1

Print this entire topic ·

Baytown

Member Since: 30 Jan 2016
Location: Cairns Australia
Posts: 87

2012 Defender 110 V8 Petrol CSW Auto Blenheim Silver

Oil Temp Sender Thread size? Puma

Hi folks;

Another question re fitting accessory gauges to my Defender Puma.

Does anyone know what adaptor I need to fit into the oil pressure port on the engine, so I can retain factory pressure info and fit a 1/4 oil temp probe?

? M10 ?

I purchased an SAAS 1/4 (Redarc oil temp sender) 1/8 mid port (factory oil pressure sender but 1/8 is too small so I need this size please) with 1/4 end thread.

I realise I can tell what size I need by disconnecting the factory sender and seeing if the 1/4 inch SAAS unit will fit the block, but If I can find out without spilling oil all over myself first (remember, open 1/8 mid port) I’d prefer to ask, and use what others recommend.

Thanks in advance and best wishes all.

Ken

Click image to enlarge

17th Oct 2019 10:30pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6657

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

1/4"x18tpi NPTF

1988 90 Td5 NAS soft top

2015 D90 XS SW

18th Oct 2019 12:59pm

Baytown

Member Since: 30 Jan 2016
Location: Cairns Australia
Posts: 87

Thank you.

Fantastic.
Thank you Martin.
I just need a 1/4 to 1/8 reducer for the centre port in the adaptor then.
Good on you.👍

19th Oct 2019 6:30am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6657

Don’t you need a 1/4 - 1/4 - 1/4 t piece fitting?

Nothing you are trying to fit is 1/8

1988 90 Td5 NAS soft top

2015 D90 XS SW

19th Oct 2019 8:01am

Baytown

Member Since: 30 Jan 2016
Location: Cairns Australia
Posts: 87

Hi mate.
No, as the threaded male end of the pictured fitting is 1/4 inch. It should fit the block.
The other end has the Redarc 1/4 inch temp sender fitted.
I need to fit a 1/4 inch to 1/8 reducer into the 1/8 centre port on the fitting so I can attach the factory 1/4 inch pressure sender.
Simples😗

19th Oct 2019 8:24am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6657

You're quite right, I was thinking of it from the other end

1988 90 Td5 NAS soft top

2015 D90 XS SW

21st Oct 2019 11:10am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum