DEFENDER2.NET - View topic - Fitting Hp24 autobox

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Fitting Hp24 autobox

Page 1 of 1

Print this entire topic ·

The Monkey

Member Since: 11 Aug 2013
Location: Meath
Posts: 63

Fitting Hp24 autobox

Hi all about to fit my hp24 box to my td5!
Would I be right in saying that you fit the TC to the pump first and then fit box.
Once fitted you then attach the TC to the flywheel.

Also is it reccomended to change the oil seal in the bells housing and possibly change the filter in the box itself. Although I've changed a few manual boxes this will be my first auto.
Any advice appreciated. 👍
Cheers.

2nd Dec 2019 9:48pm

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10382

Hp24? You having the electronics?

Anywho, pumpkin (torque converter) on the pump first, make sure it’s sat properly to avoid damage.

All the information you need can be found on Ashcroft’s site, as well as hints and tips, as well as parts for the filter swap etc.

I had Ashcroft build me a ‘monster box’ best thing i did as it transformed the v8.

2nd Dec 2019 10:27pm

The Monkey

Member Since: 11 Aug 2013
Location: Meath
Posts: 63

Cheers lad! I've a compushift to make it work.
Hopefully 🤞
I'll check out the Ashcroft site.

2nd Dec 2019 10:39pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum