DEFENDER2.NET - View topic - RPM not working, Temp Gauge at max, loss off engine power

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > RPM not working, Temp Gauge at max, loss off engine power

Page 1 of 1

Print this entire topic ·

DeCA

Member Since: 18 Aug 2020
Location: Vlaanderen
Posts: 8

2007 Defender 90 Puma 2.4 SW Barolo Black

RPM not working, Temp Gauge at max, loss off engine power

Hi There, problems in my dashboard and loss and lack /loss of power, due to gauge meters that not working properly, I cannot find a solution. I installed a winch, perhaps wrong???
Puma 2.4, 2007MY

21st Jul 2022 4:25pm

macfrank

Member Since: 05 Nov 2015
Location: somewhere in the north
Posts: 1111

2015 Defender 110 Puma 2.2 SW Keswick Green

Maybe check your electrical connections first? Such as battery terminals and whatever you have touched during installation? Bad/loose connections could cause ECU confusion.

21st Jul 2022 5:42pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2279

As above it does seam a battery connection issue.

When installing your winch have you added an additional negative to your negative battery terminal clamp ?

If so it will likely be preventing the clamp gripping the negative terminal correctly and this could be your problem.

There is an easy fix for this if that’s the issue.

21st Jul 2022 5:52pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum