↓ Advertise on Defender2 ↓

Home > Td5 > Immo problem or?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Defendertomten



Member Since: 19 Aug 2020
Location: Avesta
Posts: 48
Sweden 2000 Defender 130 Td5 HCPU Coniston Green
Immo problem or?
My defender lost power and wont start. I measured the volt output to starter relay during keyswitch and its only 8,8v

The keys coil is probably dead though i have driven it the last ten years putting in eka code.
But now it seems not to want to beep beep for the eka code.
I have tried to bypass starter and egine starts as normal but stoms within two three secons so its the immo causing trouble.
But i wonder if there’s additional problems that causes the ecu not to prompt for eka code.
I have extra-earthed engine with jumpstarter cable but no success.
Post #850904 19th Aug 2020 1:16pm
View user's profile Send private message View poster's gallery Reply with quote
Defendertomten



Member Since: 19 Aug 2020
Location: Avesta
Posts: 48
Sweden 2000 Defender 130 Td5 HCPU Coniston Green
I have come so far that earth in starter relay is not really earthed. Made a bypass earth then it cranks but stopps again.
Probably due to the fking immobilizer.
Have to investigate which earthpoint it is then.
Post #850944 19th Aug 2020 3:46pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums