DEFENDER2.NET - View topic - output shaft oil seals help please

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > output shaft oil seals help please

Page 1 of 1

Print this entire topic ·

rossy

Member Since: 29 Nov 2010
Location: Co. Roscommon
Posts: 1296

2011 Defender 110 Puma 2.4 CSW Stornoway Grey

output shaft oil seals help please

recently I had the clutch and output shaft changed with LOF kits. The drive is fantastic - light, smooth no shunting or clunks whatsoever.

Yesterday I noticed some oil seeping out of the joint between the G Box and T box from the little drain hole. It smells like Tbox oil (syntrax) as the gearbox oil (multi vehicle) has no smell.

When I went back to the chap who did the job he was surprised that the output shaft came with seals for the gearbox end but not the transfer box end and as he had to make a sliding device to ease the Tbox back on to the shaft he would have thought that a new seal for the Tbox would be necessary instead of just using the old one. On checking the LOF site and others these kits don't appear to include this seal.

The mechanic has offered to take it apart again ( it will be a lot easier this time - everything well greased etc) and has asked me to get a complete seal pack.
Before I phone LR or LOF again I just want to make sure I am going to get the right seals - particularly at the transfer box end. Its a 2.4 and the LOF output shaft was the ' genuine updated Landrover' one (not ashcroft).

As always grateful for any advice

24th Mar 2019 11:44am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17713

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

The transfer box input shaft seal is FRC7043, it's the same on all applications of the LT230 transfer box.

I am not aware that LR has ever updated the adaptor shaft kit except for the inclusion of grease.

24th Mar 2019 2:48pm

rossy

Member Since: 29 Nov 2010
Location: Co. Roscommon
Posts: 1296

Thanks Blackwolf
I'd better get 2 as they seem to be the same at the g/box end and handbrake drum end. Cheers mate.

24th Mar 2019 9:53pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum