DEFENDER2.NET - View topic - Indicators stop flashing

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Indicators stop flashing

Page 1 of 1

Print this entire topic ·

Phid

Member Since: 25 May 2018
Location: Dorset
Posts: 85

Indicators stop flashing

If indicators are left on for a while they stop flashing. Hazards work ok. For that reason I changed the indicator switch. Made no difference. I have taken the relay out and put it back in. This resulted in an improvement - ie they flash for longer before stopping.

So I suspect the relay is at fault but surprised the hazards are ok - I assume they use the same relay.

Am I right to replace relay or could it be something else?

Thanks

19th Jan 2019 6:07pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20413

Standard indicators or LED?

$W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

19th Jan 2019 6:19pm

Phid

Member Since: 25 May 2018
Location: Dorset
Posts: 85

Standard. 4pin not adjustable flasher relay

19th Jan 2019 6:30pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20413

I would remove, check and clean the earth strap on the transfer box.
If that doesn't do the trick, try a new Relay and go from there and see if that works out.

Do you have a Multimeter? If so, that may help diagnose your issues with some testing on the feeds at the indicators. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

19th Jan 2019 6:33pm

Phid

Member Since: 25 May 2018
Location: Dorset
Posts: 85

Thanks
So the fact that the hazards are working ok - means they’re on a different relay?
Would a bad earth on the transfer box not affect other electrics?

19th Jan 2019 6:39pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20413

It's the same relay but more current flow with all four indicators flashing.

Earth faults can cause all manor of problems, of varying nature.

Were the pins of the relay or holder corroded at all?

I would say the Relay needs changing, it seems to not be detecting the 50% load compared to 100% load with the hazard flashing.
I'd just check the earth strap as it's free to do.

$W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

19th Jan 2019 7:05pm

Phid

Member Since: 25 May 2018
Location: Dorset
Posts: 85

Thank you

19th Jan 2019 11:11pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum