DEFENDER2.NET - View topic - Front shock/shock Tower removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Front shock/shock Tower removal

Page 1 of 1

Print this entire topic ·

big110

Member Since: 02 Nov 2016
Location: Sweeden
Posts: 342

2014 Defender 110 Puma 2.2 SW Keswick Green

Front shock/shock Tower removal

Could someone give me a step by step on how to remove the stock shock towers up front on a 2014 puma?

30th Nov 2018 11:18pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20453

Start with soaking bolts in WD40 overnight, clean nuts and threads.
When undoing them, take it very easy as they are prone to shear but they should be fine.
Just take it easy taking them off and by hand tools.

Remove the plastic inner arch sections, two self tappers on each.

You should be then able to extract both at the same time though the engine bay with the lower damper nut removed.

Then you can work on removing the top mount off of the vehicle.

There is a torque figure for the new nuts / rings, contained in the WSM.

I think I've covered most things, but anyone feel free to add anything.
I'd be interested to hear people's methods of tightening and removing the upper damper mounts No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

1st Dec 2018 12:39am

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5729

2006 Defender 110 Td5 USW Zermatt Silver

This may help.

https://www.defender2.net/forum/topic16066.html

1st Dec 2018 6:26am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum