DEFENDER2.NET - View topic - 2002 110 "black" limited edition

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > 2002 110 "black" limited edition

Page 1 of 10

Print this entire topic ·

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

2002 Defender 110 Td5 Black LE Java Black

2002 110 "black" limited edition

Ok, so this is one of those basic limited editions that land rover seem to produce from time to time, but a limited edition none the less. I have had it about a year and have done plenty already but thought it about time I started a specific thread.

Here is how she arrived on my door back in April 2012.

Click image to enlarge

This is the best picture I can find. She arrived minus the camping gear of course. I have since removed the wonky land rover lettering on the bonnet and spent many hours polishing. All he doors have been refurbished, including welding the frames and repainting.

I have fitted heated seats. Tried to link to my install guide but it seems to have disappeared.

I decided to underseal her this week and after pressure washing off the old stuff, I felt I ought to share her condition with you all. I was a little worried about what I would find as seen as she is 11 years old. I will let he pictures do the talking

The products

Click image to enlarge

The condition of the chassis

Click image to enlarge

Click image to enlarge

I was amazed to see that the chassis is still 99.9% covered in factory paint. This thing must have been under sealed by the previous owners from new!

More to follow including progress on undersealing and my double cab storage solutions....

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

25th May 2013 8:18pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

Found the heated seat thread

http://www.defender2.net/forum/topic17504....eated+seat

25th May 2013 8:40pm

JWL

Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443

Nice looking motor, there must have been a bit of a purge on in 2002 at Lode Lane because my 110 has got very little evidence of rust on the chassis, bit of surface rust on the rear cross member but the chassis is fine. There is still some evidence of underseal in places and I seriously doubt the previous owner added to any sort of rust prevention as it was just one of many in their fleet!

25th May 2013 9:26pm

GUM97

Member Since: 05 Feb 2012
Location: Cheshire
Posts: 3555

1997 Defender 90 300 Tdi HT Stornoway Grey

Very nice! What's different about this limited edition compared to a standard Defender? An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948"

25th May 2013 9:28pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

I am beginning to think it must have been a good year too. It doesn't leak either!

Come to think of it, it doesn't leak oil either!

25th May 2013 9:29pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

Not much. Full leather interior plus xs spec, loads of chequer plate and a front "windscreen protector", otherwise known as a fake roll cage, similar to the tomb raider one

The canvass back has windows on the side too....is this unusual?

25th May 2013 9:33pm

GUM97

Member Since: 05 Feb 2012
Location: Cheshire
Posts: 3555

Jimb1978 wrote:

The canvass back has windows on the side too....is this unusual?

I think that's normal

An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948"

26th May 2013 8:15am

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6771

It certainly is a lovely looking motor

26th May 2013 8:32am

T1G UP

Member Since: 08 Dec 2009
Location: Bath
Posts: 3101

2011 Defender 110 Puma 2.4 XS CSW Orkney Grey

Jimb1978 wrote:
Not much. Full leather interior plus xs spec, loads of chequer plate and a front "windscreen protector", otherwise known as a fake roll cage, similar to the tomb raider one

The canvass back has windows on the side too....is this unusual?

Jason G 110 has one like this. His is a G4 and very nice it is.

26th May 2013 9:37am

JeremyJ

Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758

I'm trying to buy a Black LE 110! Only catch is I seem to be third in line for it!

Originally they had a silver front hoop but several where swapped or painted to black. The rear good should be black with side windows (most seem to have now got later ones/ none at all).

Your looks great!

27th May 2013 5:14pm

Pam W

Member Since: 25 Oct 2011
Location: North Yorkshire
Posts: 1169

Not been updated for a while but there is an Defender Black Owners website here -
http://www.defenderblack.co.uk

Chap who runs/ran it Is Paul Sandever - we host the site for him, but not heard from him of a while so not sure if he still has his Black or not. Our blog - http://landytravels.com/

Yorkshire Off Road Club - http://www.yorkshireoffroadclub.net

27th May 2013 6:42pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

I tried to upload my details to that site last year pam but it seems pretty dormant.

27th May 2013 6:44pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

Quote:
Originally they had a silver front hoop but several where swapped or painted to black. The rear good should be black with side windows (most seem to have now got later ones/ none at all).

Mine was powder coated black by the previous owner. I thought about returning it to original as apart from the winch it is totally standard and unmolested, including the tilt. However, they really didn't look right in silver!

27th May 2013 6:50pm

JeremyJ

Member Since: 16 Nov 2011
Location: Aylesbury
Posts: 1758

I prefer them in black, but I have a spare in silver stored away somewhere!

27th May 2013 7:22pm

Jimb1978

Member Since: 05 Sep 2012
Location: Huddersfield
Posts: 808

I spent a long hard day today under the land rover cleaning, wire brushing and de greasing. I managed to put on the hydrate 80 and do some of the masking off.

The hydrate 80 is wierd stuff. You can actually see it working and converting the rust (or is it just hiding it?!!)

I decided to strip back the crossmember ready to paint it to match the bodywork rather than underseal it.

Here you can see the colour of the hydrate 80 when it goes on and it's colour 30 minutes later

Click image to enlarge

Click image to enlarge

Underneath masked ready for spraying tomorrow

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

27th May 2013 7:51pm

Page 1 of 10

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum