Home > Tdi > 90 300tdi rear mudflaps |
|
|
trickster5000 Member Since: 12 Dec 2015 Location: East Yorkshire Posts: 504 |
I bought genuine LR mudflaps for mine and they are a straight cut. Matt.
'89 90 CSW with a 3.5 V8 conversion (WIP) - http://www.defender2.net/forum/topic46809.html |
||
19th Sep 2018 4:53pm |
|
shayes Member Since: 29 May 2016 Location: Devon Posts: 153 |
I don't think so. Mine don't have a cut out , have a look on my gallery.
Cheers, Simon |
||
20th Sep 2018 6:07am |
|
Conan Member Since: 05 Sep 2016 Location: the danger zone Posts: 53 |
Mine have a cut out as well.
I don't have pitcures with me at the moment but can send some later if needed. |
||
20th Sep 2018 7:33am |
|
shayes Member Since: 29 May 2016 Location: Devon Posts: 153 |
Senior moment. Just been out to the garage and mine DOES have a cut out around the exhaust, sorry about that.
Click image to enlarge Cheers Simon |
||
20th Sep 2018 7:37am |
|
Conan Member Since: 05 Sep 2016 Location: the danger zone Posts: 53 |
Simon, mine are the same.
|
||
20th Sep 2018 7:40am |
|
Slideywindows Member Since: 09 Sep 2016 Location: North Essex Posts: 1286 |
My 300 Tdi doesn't have the cut-out in the rear LH flap and the exhaust doesn't need it.
Which was the original spec - as mudflaps get replaced quite often? Click image to enlarge |
||
20th Sep 2018 9:13pm |
|
trickster5000 Member Since: 12 Dec 2015 Location: East Yorkshire Posts: 504 |
Mine didn't have rear mudflaps when I bought it but when I went to an LR parts dealer he told me these were the correct genuine flaps for my vehicle. 10,000 miles later and they have no soot on them so no problem with where the exhaust exits
Click image to enlarge Matt. '89 90 CSW with a 3.5 V8 conversion (WIP) - http://www.defender2.net/forum/topic46809.html |
||
20th Sep 2018 9:41pm |
|
Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6613 |
Left hand mudflap part numbers for a 90:
pre-Td5 (no exhaust cut out) CAT500450PMA Td5 and Puma (exhaust cut out) LR055340 1988 90 Td5 NAS soft top 2015 D90 XS SW |
||
20th Sep 2018 10:02pm |
|
Slideywindows Member Since: 09 Sep 2016 Location: North Essex Posts: 1286 |
Thanks for clearing that up.
I know mine are correct now. |
||
21st Sep 2018 3:42pm |
|
Jim1988 Member Since: 26 Oct 2017 Location: Derbyshire Posts: 248 |
Would it matter if I put one on my Puma that doesn’t have a cut out? As I prefer the full flap look Thanks Jim.
|
||
21st Sep 2018 7:25pm |
|
LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324 |
Yes, as the end of the exhaust will be pointing straight at it, like this:
Click image to enlarge Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
21st Sep 2018 7:30pm |
|
Jim1988 Member Since: 26 Oct 2017 Location: Derbyshire Posts: 248 |
I see 👍🏻 Shame! Thanks Jim.
|
||
21st Sep 2018 7:33pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis