 | Home > Puma (Tdci) > Flat battery now dead - can’t reprogram key |
 
|
|
|
| cartoonhead Member Since: 02 Mar 2018 Location: Bucks Posts: 135   
|
I managed to run the battery flat on my 2.2, the lock and unlock buttons in the key don’t do anything now and when I try to start it the engine turns over once and then cuts out.
I figured I needed to reprogram the key but when I attempt to do that my GAP tool gives me error ‘E60’ - it seems for some reason it can’t communicate with the car immobiliser. I have a aftermarket immobiliser fitted by audiofile as well but I called them and they said it only immobilises the starter motor and couldnt affect the LR in this way. I’ve tried disconnecting and reconnecting the battery - makes no difference, tried a new batter in the keyfob also no difference. Anyone have any ideas please?! @tab.travels on instagram Defender 130 2.2 TDCI Defender 90 TD5 80" CCV Trialer 4.6 V8 (14CUX) Stage One V8 109 - 3.5 V8 Stage One V8 109 - 4.6 V8 (GEMS) - in progress Range Rover L322 4.4 TDV8 Freelander 1 2.0 TD4 |
||
11th Jun 2018 3:50pm |
|
| Scoobeenut Member Since: 04 Mar 2015 Location: West London Posts: 310 
|
Have you re-synced the key fob http://www.defender2.net/forum/topic37269.html?highlight=key+fob
|
||
|
11th Jun 2018 4:34pm |
|
| cartoonhead Member Since: 02 Mar 2018 Location: Bucks Posts: 135
|
I did try that with no luck mate - turns out it was the fuse that had gone! @tab.travels on instagram
Defender 130 2.2 TDCI Defender 90 TD5 80" CCV Trialer 4.6 V8 (14CUX) Stage One V8 109 - 3.5 V8 Stage One V8 109 - 4.6 V8 (GEMS) - in progress Range Rover L322 4.4 TDV8 Freelander 1 2.0 TD4 |
||
|
12th Jun 2018 5:10pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
