DEFENDER2.NET - View topic - Puma Drivers Door Card

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma Drivers Door Card

Page 1 of 1

Print this entire topic ·

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

2009 Defender 110 Puma 2.4 USW Baltic Blue

Puma Drivers Door Card

My window motor has stopped working luckily in the up position.

I have checked the fuses all ok.

I have the door card almost off but cannot figure out how it slips off past the central locking button.

Anyone done this job and able to advise me how to do it?

Thanks

10th Jun 2018 9:55am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17390

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

You have to remove the bezel round the button first, the bezel unclips and slides upwards off the button. Use a small screwdriver gently to lever the bezel upwards off its clip.

Once the bezel is off it is obvious how it comes off and why it has to. The second time you do the job it's easy!

The problem is almost certainly a broken wire in the rubber conduit to the door.

10th Jun 2018 11:03am

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Thanks

10th Jun 2018 11:21am

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7906

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

I had the same issue, it's most likely a frayed wire in the tube where it passes into the door, might be worth a check. James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

10th Jun 2018 12:52pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

I have the bezel off now and the door trim off. So that's good. Now I need to find the fault but the wiring in the tube sounds likely. Might be tomorrow before I can get back fault finding. Thanks for your help.

10th Jun 2018 5:27pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Thanks for your help and advise it was the blue wire that was broken as you suggested.
Now to see if I can get it back together.

12th Jun 2018 1:12pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum