↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Bulkhead grommet. Madman Install.
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
2010Blackdefender90



Member Since: 07 Jan 2018
Location: London
Posts: 562

United Kingdom 2011 Defender 90 Puma 2.4 SVX Station Wagon Santorini Black
Bulkhead grommet. Madman Install.
Installing my madman, does anyone know where the large bulkhead grommet lands on the dash side on a puma?

Seems to line up behind the instrument cluster...


Click image to enlarge


If I take out the instrument cluster, can I get to back of the grommet to feed the wires through there into the engine bay?

Thanks.
Post #711072 6th Jun 2018 12:55pm
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1628

Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
If you’re double jointed yes Laughing

I have a set of mole poles and pull the wires through with it.
Post #711119 6th Jun 2018 5:40pm
View user's profile Send private message View poster's gallery Reply with quote
Bluest



Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4216

United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Java Black
Ive sent a couple of wires through there. Easiest way was to get some stiff steel wire and push it through from the engine side. With the centre console and instrument cluster out you should be able to see your wire, wiggle/grasp it and pull it through into the cabin. You can then attach the wire you want to send back the other way and pull it through. I think it helped a lot if you can get someone else to assist so you have one person on each side. 2007 110 TDCi Station Wagon XS
Post #711121 6th Jun 2018 5:51pm
View user's profile Send private message View poster's gallery Reply with quote
zsd-puma



Member Since: 09 Aug 2016
Location: Kent
Posts: 2720

United Kingdom 2010 Defender 110 Puma 2.4 USW Santorini Black
It's probably just as easy to take the dash out. It's not as difficult as it looks.

The one on the passenger side is a bit easier to access from inside if feeding cables along the inside of the bulkhead is viable.
Post #711154 6th Jun 2018 7:53pm
View user's profile Send private message View poster's gallery Reply with quote
2010Blackdefender90



Member Since: 07 Jan 2018
Location: London
Posts: 562

United Kingdom 2011 Defender 90 Puma 2.4 SVX Station Wagon Santorini Black
Yep, I’ve had the dash out a lot, good shout going into the passenger grommett instead,
was looking at that instead, less cables going in there as well.

Thanks
Post #711185 7th Jun 2018 4:39am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums