↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > p1010 help
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
ribdiver



Member Since: 28 May 2015
Location: lancashire
Posts: 4
p1010 help
we have a 110 defender 2.2 whit a p0101 fault code that comes up and engine management light comes on. the fault only hapens after de acceleration after overtaking. replaced most parts that are common faults and checked hoses but sill have problem, checked intercooler and looks ok , help
Post #862093 17th Oct 2020 1:18pm
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
mass air flow sensor is outside of the manufacturer's specified range.
Post #862095 17th Oct 2020 1:28pm
View user's profile Send private message View poster's gallery Reply with quote
ribdiver



Member Since: 28 May 2015
Location: lancashire
Posts: 4
replaced the mass air filter already
Post #862243 18th Oct 2020 11:56am
View user's profile Send private message View poster's gallery Reply with quote
PCM



Member Since: 25 Jan 2019
Location: North East
Posts: 874
United Kingdom 
Replaced Filter or Sensor?
Post #862245 18th Oct 2020 12:13pm
View user's profile Send private message View poster's gallery Reply with quote
ribdiver



Member Since: 28 May 2015
Location: lancashire
Posts: 4
Changed that when we replaced the egr valve, absolutely stumped now
Post #862314 18th Oct 2020 7:44pm
View user's profile Send private message View poster's gallery Reply with quote
ickle



Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1786
France 2008 Defender 110 Puma 2.4 CSW Alpine White
Loom failed over engine block, or rubbed through near rear corner lifting eye? (if its there on a 2,2?)
Post #862492 19th Oct 2020 7:43pm
View user's profile Send private message View poster's gallery Reply with quote
ribdiver



Member Since: 28 May 2015
Location: lancashire
Posts: 4
Mass air fault
Finally sorted. Out mass air flow code fault.
One on the simplest and overlooked items on the engine. The poor quality. Jubilee clips holding the pipes from the engine to the intercooler had stripper the threads and was allowing a small amount of air vacuum into the system which was triggering the sensor to trip in. Replaced all jubilee clips on. The engine with heavy duty ones and problem now. Solved
Post #924256 3rd Oct 2021 4:48pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums