↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Immobiliser light
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Willbof



Member Since: 07 Nov 2017
Location: Cardigan
Posts: 30
Wales 2012 Defender 110 Puma 2.2 XS CSW Zambezi Silver
Immobiliser light
Hi, recently purchased a 2012 defender and have a question about the immobiliser. If I unlock the landy and start the engine reasonably soon after the light goes out no problem. If I leave it unlocked, don’t start it quickly or stop for a while and restart the immobiliser light stays solid. I’ve driven around with it on and nothing happens it just keeps going. If I switch the ignition off then back on the light goes out. Is this normal?
Thanks in advance
Post #665787 20th Nov 2017 4:29pm
View user's profile Send private message View poster's gallery Reply with quote
steve E



Member Since: 06 Mar 2011
Location: Tenby
Posts: 2073
Wales 
The light on the left if it stays on, should mean your battery in the fob needs replacing
Post #665793 20th Nov 2017 4:42pm
View user's profile Send private message View poster's gallery Reply with quote
JellyBean



Member Since: 02 Mar 2015
Location: Suffolk
Posts: 142
United Kingdom 
I am so going to try this today! I've had the same issue for months wondering what on earth was happening ......
Post #665991 21st Nov 2017 11:27am
View user's profile Send private message View poster's gallery Reply with quote
hornet



Member Since: 04 Jan 2010
Location: Western Europe
Posts: 361
From LUCAS 10AS ALARM- System Overview:

Low battery error: This configures the alarm to notify the user via the Security LED either on the first receipt of a key code in which the low battery flag is set or to wait until it has received a number of them in succession. The exact number is determined by the value stored in the LOW BAT COUNT box.

Battery Error: When set to ENABLED this configures the alarm to notify the user via the security LED that the plip has a low battery in accordance with the other settings which affect this function's operation. When set to NO the function is totally disabled
Post #666039 21st Nov 2017 3:35pm
View user's profile Send private message View poster's gallery Reply with quote
Willbof



Member Since: 07 Nov 2017
Location: Cardigan
Posts: 30
Wales 2012 Defender 110 Puma 2.2 XS CSW Zambezi Silver
Hmm, bit strange because it only happens after I’ve stopped, not locked it and started it up again. I would’ve thought a low battery alarm would be on all the time?
Post #666058 21st Nov 2017 4:21pm
View user's profile Send private message View poster's gallery Reply with quote
steve E



Member Since: 06 Mar 2011
Location: Tenby
Posts: 2073
Wales 
Changed the batteries in mine and it's fine now
Post #666127 21st Nov 2017 8:54pm
View user's profile Send private message View poster's gallery Reply with quote
PAT303



Member Since: 25 Feb 2013
Location: Australia
Posts: 125
Australia 1998 Defender 110 300 Tdi SW Alpine White
Does the motor still crank but not start if the immobilizer is on?.
Post #666160 22nd Nov 2017 4:22am
View user's profile Send private message View poster's gallery Reply with quote
90dv



Member Since: 29 Jun 2011
Location: Cumbria
Posts: 36
United Kingdom 
10AS function means it'll allow the vehicle to crank while doing security check with PCM through IPK. If the security check isn't successful (no fob detected) the vehicle will stop cranking. Usually get crank and fire but then cuts out immediately. This is done to avoid a delay in cranking while fob immobiliser code is checked.
Post #666179 22nd Nov 2017 9:17am
View user's profile Send private message View poster's gallery Reply with quote
Willbof



Member Since: 07 Nov 2017
Location: Cardigan
Posts: 30
Wales 2012 Defender 110 Puma 2.2 XS CSW Zambezi Silver
Runs fine, can drive around no problems except a bright red light in my face
Post #666289 22nd Nov 2017 6:42pm
View user's profile Send private message View poster's gallery Reply with quote
PRENT1



Member Since: 02 Sep 2015
Location: bromley
Posts: 42
United Kingdom 2011 Defender 110 Puma 2.2 XS CSW Santorini Black
The other night i returned to my 2.2tdi to find neither of my fobs working, on opening the car with my key no central locking. when i put the key in the ignition no turn over but triggered the alarm..
AA came no joy tried several things ECU read; fault code/s:System : Engine control - 7MF / Diesel CR/EDC ZSD 422 Status :B1206 - Crash data stored. Error Message : Malfunction
Flat beded it to my local LR garge they have told me £2k to replace the alarm module(fried was the terminology) and some wiring.
Any ideas in the Bromley, Kent area?
Post #683592 2nd Feb 2018 10:43am
View user's profile Send private message View poster's gallery Reply with quote
Willbof



Member Since: 07 Nov 2017
Location: Cardigan
Posts: 30
Wales 2012 Defender 110 Puma 2.2 XS CSW Zambezi Silver
20amp fuse under the steering column!
Post #683593 2nd Feb 2018 10:49am
View user's profile Send private message View poster's gallery Reply with quote
Willbof



Member Since: 07 Nov 2017
Location: Cardigan
Posts: 30
Wales 2012 Defender 110 Puma 2.2 XS CSW Zambezi Silver
Top right hand side if I remember correctly
Post #683595 2nd Feb 2018 10:50am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums