 | Home > Maintenance & Modifications > Wiring route to Heated Windscreen |
 
|
|
|
| rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2237   
|
Would someone with a 2 tab type heated windscreen (preferably factory fitted) mind looking at where the wires are routed to the screen and how they are terminated to the screen please.
I am just putting the wiring into my replacement wiring loom and unsure what length/route they take to the screen. Cheers, Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
15th Nov 2017 11:14am |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17479 
|
Spade connectors (can't remember the size but I think 6mm), one in each lower corner.
|
||
|
15th Nov 2017 12:46pm |
|
| rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2237
|
cheers, I presume the wires follow the same route as the loom running up the A-Pillar does on the RHS?
Which orientation are the terminals, cant quite make it out on the photos online from VGS Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
|
15th Nov 2017 1:30pm |
|
| rustandoil Member Since: 08 Sep 2012 Location: Cotswolds Posts: 755  
|
The wiring doesn't get as far as the A pillar, it just comes out between the top of the dash and the screen rubber
|
||
|
15th Nov 2017 1:34pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6613 
|
6.35mm Posi-Lock are the original fit, they latch onto the screen tabs.
 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
15th Nov 2017 1:40pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
