↓ Advertise on Defender2 ↓

Home > Td5 > Ashcroft gearbox
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Martin 01



Member Since: 13 Feb 2012
Location: East Yorkshire
Posts: 502
Ashcroft gearbox
Need a new gearbox for my Defender.
Going to go with Ashcroft as they seem to be the best & offer a decent warranty.
Just want to know if it is worth the extra money for the upgraded bearings ?
I do tow a caravan from time to time & it does have an Alive map on it.
Also be fitting a new clutch & flywheel at the same time so should all be ok.
Post #646609 27th Aug 2017 5:09pm
View user's profile Send private message View poster's gallery Reply with quote
mick



Member Since: 08 Feb 2010
Location: Yorkshire
Posts: 2109
England 2010 Defender 130 Puma 2.4 HCPU Rimini Red
Not sure on the bearings they will advise I guess but Ashcroft seem to be the best bet Thumbs Up
My Indy recommend there stuff as doing what it says on the tin.
Post #646661 27th Aug 2017 8:59pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5843
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
I got upgrades in my gearbox. Not sure if any better but feel more confident. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #646664 27th Aug 2017 9:01pm
View user's profile Send private message View poster's gallery Reply with quote
Harry.O



Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 713
United Kingdom 1989 Defender 90 300 Tdi ST Nato Green
My R380 let go earlier this year due to the carrier bearings so I bought a recon box from Ashcrofts with uprated bearings. No idea if they will last longer although hopefully so. The standard ones are a known weakpoint of the R380 so figured it was worth doing.

I'd recommend their V8 5th gear ratio at the same time Thumbs Up
Post #646736 28th Aug 2017 9:20am
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
output carrier bearings and 5th gear layshaft bearings made by RHP ( SKF ) land rover now using NWB 2515 BC 1410 £90.00 box marked made in chine Rolling Eyes

FTC3371 output carrier RHP RJ2022, FTC2385 5th gear layshaft carrier RHP 2023 or A&S Fersa F19055 Bearing
Post #646769 28th Aug 2017 2:27pm
View user's profile Send private message View poster's gallery Reply with quote
Brucey



Member Since: 18 Jul 2012
Location: Warsaw, Poland
Posts: 61
Poland 2004 Defender 110 Td5 DCPU Auto Java Black
If you want to save some cash, I have a 'known good' R380 for sale in FS&W.... Smile

Chris Defender 110 DC converted Auto
BMW R1200GS
BMW F650GS Dakar
Post #647131 30th Aug 2017 8:42am
View user's profile Send private message View poster's gallery Reply with quote
Chris86



Member Since: 15 Jul 2014
Location: South Yorks
Posts: 788
United Kingdom 2005 Defender 110 Td5 USW Chawton White
Have you considered Syncro-Works.

A lot of the Ultra 4 and challenge truck folks are running his gear, and it has proven to be very very durable.

Chris
Post #647134 30th Aug 2017 9:09am
View user's profile Send private message View poster's gallery Reply with quote
ashtrans
Site Sponsor


Member Since: 08 Nov 2008
Location: Harpenden
Posts: 257
United Kingdom 
dorsetsmith wrote:
output carrier bearings and 5th gear layshaft bearings made by RHP ( SKF ) land rover now using NWB 2515 BC 1410 £90.00 box marked made in chine Rolling Eyes

FTC3371 output carrier RHP RJ2022, FTC2385 5th gear layshaft carrier RHP 2023 or A&S Fersa F19055 Bearing


These 2 bearings are very important, A&S Fersa and NWB both had failures after 3-4 months if used hard, the original RHP's were OK but not great, they could still fail after 12-18 months but when these were no longer available we got our own made by NKE in Austria , to get these 2 made with their MOQ was £120K, we have not had one fail since we have had them, about 4-5 years, better than RHP by far, note the HD ones we fit are also NKE,

Dave Dave
Post #647484 31st Aug 2017 8:03pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 01



Member Since: 13 Feb 2012
Location: East Yorkshire
Posts: 502
All sounds good to me Dave.
I need to call tomorrow & get one ordered. Thumbs Up
Post #647505 31st Aug 2017 8:53pm
View user's profile Send private message View poster's gallery Reply with quote
Martin 01



Member Since: 13 Feb 2012
Location: East Yorkshire
Posts: 502
Chris86 wrote:
Have you considered Syncro-Works.

A lot of the Ultra 4 and challenge truck folks are running his gear, and it has proven to be very very durable.

Chris


No not considered them Chris as never heard of them.
Might take a look though. Thumbs Up
Post #647508 31st Aug 2017 8:56pm
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
ashtrans wrote:
dorsetsmith wrote:
output carrier bearings and 5th gear layshaft bearings made by RHP ( SKF ) land rover now using NWB 2515 BC 1410 £90.00 box marked made in chine Rolling Eyes

FTC3371 output carrier RHP RJ2022, FTC2385 5th gear layshaft carrier RHP 2023 or A&S Fersa F19055 Bearing


These 2 bearings are very important, A&S Fersa and NWB both had failures after 3-4 months if used hard, the original RHP's were OK but not great, they could still fail after 12-18 months but when these were no longer available we got our own made by NKE in Austria , to get these 2 made with their MOQ was £120K, we have not had one fail since we have had them, about 4-5 years, better than RHP by far, note the HD ones we fit are also NKE,

Dave



can Ashcroft supply HD output carrier bearing, as RHP bearing no longer available from LR and they are supply NWB 2515 BC 1410 £90.00 box marked made in chine

and if you look at the roller on the NWB 2515 BC 1410 bearing 1/3 smaller so more point load
Post #647553 1st Sep 2017 5:44am
View user's profile Send private message View poster's gallery Reply with quote
ashtrans
Site Sponsor


Member Since: 08 Nov 2008
Location: Harpenden
Posts: 257
United Kingdom 
Do you mean FTC2385 ? Dave
Post #647568 1st Sep 2017 6:55am
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
FTC3371 output carrier bearing

In the process of rebuilding my R380, order replacement FTC3371 output carrier bearing from LR and was send
NWD bearing as a replacement, box had RHP RJ2022 fitted from new as far as I no.
Post #647569 1st Sep 2017 6:58am
View user's profile Send private message View poster's gallery Reply with quote
ashtrans
Site Sponsor


Member Since: 08 Nov 2008
Location: Harpenden
Posts: 257
United Kingdom 
yes we have FTC3371 made by NKE which we find better than genuine RHP and way better than NWB or A & S Fersa

Dave Dave
Post #647598 1st Sep 2017 9:41am
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
thanks

Can Ashcroft supply FTC3371, FTC2385 made by NKE ?
Post #647599 1st Sep 2017 9:49am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums