 | Home > Tdi > R380 300 tdi gear box mounts |
 
|
|
|
practically, and are causing some trouble for the setup.
| Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674   
|
These can either be a pain or easy to do, the best way is to support it on a jack, loosen everything off to free the mounts, raising/lowering as needed. The rebuild is the same everything together loose and then have fun trying to align it al. It's not a hard job but can test the patience for some people.
Take your time with plenty of brews and you will be fine.  90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
28th May 2017 8:19am |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5201 
|
Thanks mash, looks like its a weekend job and a half then. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
28th May 2017 6:37pm |
|
| oneten110 Member Since: 02 Jul 2011 Location: Wish I was still in France Posts: 741
|
The genuine mounts are quite soft so it is possible to manhandle them a bit to get them into position, watch out for the razor sharp edges of the heat shield on the exhaust side mounting though.
|
||
|
22nd Aug 2017 5:18pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
