 | Home > Maintenance & Modifications > Where to buy precut Dynamat ? |
 
|
|
|
| Bluericky Member Since: 26 Jun 2014 Location: Cornwall Posts: 647   
|
Hi all , as the title suggests I'm after some dynamat.
I've heard it's worth buying it pre-cut as it saves hours on labour. I've found a couple of kits for 90/110 but nothing for a 110 double cab. I don't want o pay for bits I won't use ! Any ideas ? Could've sworn I saw one on eBay a few weeks ago.  Click image to enlarge |
||
23rd Jul 2017 7:48am |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1763 
|
To be honest, a few sharp Stanley blades and a piece of plywood to work on is all you need. You won't waste any as all but the smallest scraps can be used.
The increased cost of a pre cut pack will far outweigh the half sheet you might waste in a bulk pack! |
||
|
23rd Jul 2017 9:32am |
|
| Bluericky Member Since: 26 Jun 2014 Location: Cornwall Posts: 647
|
Ok thanks guys , I'd read it takes a lot longer to cut it to size yourself that was all.
I may have to resort to a bulk pack |
||
|
23rd Jul 2017 10:03am |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1763
|
Depends, as much as some people will go for it, you really don't need 100% coverage, anything over about 50% is meant to have practically the same effect
|
||
|
23rd Jul 2017 1:04pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20371
|
^^^^ Very true, but I like 100% as for the cost you may as well get 100% effect and it's fit and forget.
 $W33T $0U7H3RN $UG4R
🇬🇧🏴🏴🏴🇮🇪🇺🇸⛽️🛢️⚙️🧰💪 |
||
|
23rd Jul 2017 3:39pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
