DEFENDER2.NET - View topic - Single blower speed

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Single blower speed

Page 1 of 1

Print this entire topic ·

bifterx

Member Since: 29 Nov 2014
Location: North Wiltshire
Posts: 33

Single blower speed

Just changed both wiper boxes and worm on my late td5 (what a job!) put all back together, my heater blower now only has one speed. On its 'high' sped setting I get a dribble about the same as low speed, on low speed I get nothing . Took binnacle back out and swapped wires on terminals and I got nothing at all so changed back.

Any ideas? I can't think what could have changed

Cheers
Rob Disco 300TDi XS - Gone
Disco 3 SE manual - Gone 😭
Freelander 2 SE manual
Defender 110 TD5 DC

28th May 2015 10:15pm

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Resistor pack has thrown it's hand in or a terminal on it has become detached. If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

29th May 2015 7:53am

bifterx

Member Since: 29 Nov 2014
Location: North Wiltshire
Posts: 33

Deffo not a terminal, I messed about with it whilst the dash binnacle was out.
When you say resistor pack, there is a resistor on the mechanism or do you mean the actual lever (used to call them rheostats when I were a lad) Disco 300TDi XS - Gone
Disco 3 SE manual - Gone 😭
Freelander 2 SE manual
Defender 110 TD5 DC

29th May 2015 8:28am

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

Forgot yours is a TD5. The Puma has two seperate resistors 0.45 and 0.55 ohms which are switched in individually or in series dependant on fan speed selected.

Same principle, get a multimeter and check that your potentiometer hasn't an open circuit perhaps or more likely a short circuit as it is on high speed only? If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

29th May 2015 10:05am

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

K9F. You out there listening?
If so how you keeping? We got snow today which is more defender weather than HD but I guess you'll still be over the moon with the HD. Out with the polishing rag each night and standing back in admiration?

Speed 1 on mine packed a while back. Speed 2 also now packed in and just speed 3 left.
I'm guessing both resistors are shot and we're running a direct circuit now?

Where are the resistors - I need to swap?

Forgot to add the illumination of the speed/numbers I also intermittent. The speed control isn't intermittent just the illumination.

11th Feb 2017 8:02am

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

not got round to fixing it yet but it would appear if I turn the a/c button on speed 2 also works ?

any thoughts

12th Apr 2017 2:55pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

haven't tested it but the leads on the resistor pack had over heated.....

Click image to enlarge

10th Jun 2017 8:52am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum