Home > Technical > 2011 TDCI door lock fail |
|
|
Hal Member Since: 04 Jun 2014 Location: Bedford Posts: 91 |
Mine did that. Broken wire. Getting the door card off isn't difficult, just be careful not to break the clips. Wait til you get a warm day, everything gets brittle in the cold.
|
||
21st Jan 2017 3:19pm |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4793 |
+1 for a broken wire, it's a common fault 2002 90 Td5 Station Wagon
1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
21st Jan 2017 4:20pm |
|
Pinky Member Since: 09 Jun 2016 Location: England Posts: 210 |
Thanks guys, is it likely to be where it enters the door?
|
||
21st Jan 2017 4:27pm |
|
ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816 |
They all do that indeed (second row doors on 110s). I had my right side rear door wire replaced a good year ago, so that was after 7 years, and the left side wires broke just two months ago and were replaced recently. Probably good again for another 5 years or more now.
Eric You never actually own a Defender. You merely look after it for the next generation. http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
21st Jan 2017 4:27pm |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4793 |
Yes in the rubber flex between the door and pillar is a good place to start looking. If not in there then the trim will have to start coming off 2002 90 Td5 Station Wagon
1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
21st Jan 2017 4:29pm |
|
Pinky Member Since: 09 Jun 2016 Location: England Posts: 210 |
Thanks!
|
||
21st Jan 2017 5:38pm |
|
rossy Member Since: 29 Nov 2010 Location: Co. Roscommon Posts: 1296 |
Mine were done a couple of years ago under warranty. With kids the rear doors get used a lot and the constant bending of the thin wire snaps it. The dealer was well aware of this problem and always uses normal electrical flex from a Twin + Earth cable for a more long term fix. He even showed me how to do it myself should it happen again (except I've forgotten )
. |
||
22nd Jan 2017 6:32pm |
|
Gonarezhou Member Since: 08 Mar 2015 Location: White River Posts: 178 |
Eh .... any chance you could go to a hypnotist or something? it would be a great fix to know.
|
||
22nd Jan 2017 7:17pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis