 | Home > Maintenance & Modifications > Steering Guard and Jate Rings |
 
|
|
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013  
|
Looks as though the bumper has black "recovery points" on the lower side also
 |
||
9th Feb 2012 6:12pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8581
|
I wonder what that fair lead is made off? If aluminium forcing hook into it is not a good idea on a synthetic rope as it would cause a burr which will not do synthetic rope any good.
Rubber bush on rope will prevent that damage or hook the hook onto what appears to be Jate rings under bumper. Brendan |
||
|
9th Feb 2012 7:29pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
looks like a genuine LR steering guard, there is a little space where you could fit jates, best bet is to visit a dealer and have a look.
the instructions can be downloaded from topix |
||
|
9th Feb 2012 8:24pm |
|
| WarPig Member Since: 04 Dec 2009 Location: Sheffield Posts: 1748  
|
Edit - Those black things are not JATE (Joint Air Transport Establishment) but the others do look like the older rounded Jates..
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Last edited by WarPig on 9th Feb 2012 9:14pm. Edited 1 time in total |
||
|
9th Feb 2012 8:35pm |
|
| twopoint6khz Member Since: 18 Aug 2011 Location: North Lakes Posts: 654 
|
Neither are the black things under the bumper JATE rings, they're lashing points for putting the vehicle on a transporter. You may get away with using them for light towing, but I wouldn't recommend it...
EDIT: No they aren't, I couldn't see the picture properly  But most LRs come with the crappy tow points anyway |
||
|
9th Feb 2012 9:09pm |
|
| JSG Member Since: 12 Jul 2007 Location: Berkshire Posts: 2412 
|
It depends on the steering guard - some have enough clearance for the jate rings but as far as I remember the genuine parts one doesn't.
The other option is to go for a steering guard with built in recovery points. John http://www.hampshire4x4response.co.uk 2011 Tdci 110 CSW XS |
||
|
9th Feb 2012 9:50pm |
|
| Inigo Member Since: 13 Nov 2011 Location: Kent Posts: 617 
|
That's what I thought previously and had resigned myself to something like a Rebel with inbuilt recovery points, but I really like the look of these ribbed ones and was surprised to see them with Jate rings.
Checking on the press photos for MY12 (trying to upload to my gallery), they have at least 3 different vehicles with these fitted. I would ask my dealer, but while being lovely chaps, they do tend to come up with answers that are convenient rather than correct. |
||
|
10th Feb 2012 1:06am |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5013
|
Why not get one of Devon4x4's bumpers with built in points
 |
||
|
10th Feb 2012 8:47am |
|
| markb110 Member Since: 22 May 2010 Location: Guildford Posts: 2638 
|
The steering guard pictured is Land Rover's own version as fitted to the military 'Wolf' hence the jate rings are made to be accessable
Expect to pay Land Rover prices if looking to get from a main dealer Mark |
||
|
10th Feb 2012 9:10am |
|
| ay4alex Member Since: 18 Feb 2009 Location: Midlands Posts: 328 
|
The black points are part of the LR winch bumper, standard fitment. they are welded to the bottom of the winch tray. Just fitting JATE rings and the LR nudge bar was a tight squeeze, so making them fit with a steering guard must be a proper chore. 110 Tdci Double Cab
|
||
|
10th Feb 2012 11:54am |
|
| ay4alex Member Since: 18 Feb 2009 Location: Midlands Posts: 328
|
Just been and taken a couple of pics
Click image to enlarge Untitled by .:ay4alex:., on Flickr Click image to enlarge Untitled by .:ay4alex:., on Flickr Don't judge me on the rust  110 Tdci Double Cab |
||
|
10th Feb 2012 11:59am |
|
| PaulMc Member Since: 17 Jan 2009 Location: Kent Posts: 501 
|
I've lightened the picture to make the underside a bit clearer.
As has already been said, the Steering Guard looks like a Genuine LR 'Wolf' one, which is designed to be used with JATE Rings. The Winch Bumper also has Recovery Points. Click image to enlarge Genuine JATE Rings, come in two flavours - The standard one RRC3237 Click image to enlarge And the one that's modifed to fit with a Steering Guard - ZXC9435 Click image to enlarge . Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Paul.
1989 Arles Blue 2.5TD 110 Hardtop 1999 Epsom Green Discovery II 4.0 V8i 'XS' |
||
|
10th Feb 2012 4:26pm |
|
| Inigo Member Since: 13 Nov 2011 Location: Kent Posts: 617
|
Ordered genuine steering guard part number LR008247 and special jate rings ZXC9435. Now however, it seems that Landrover have changed the shape of their steering guard cutouts. Instructions fairly clearly show shape of cutouts to allow Jate rings to fit:
My steering guard is not the same: Click image to enlarge How tricky would it be to get this cut to the correct shape to allow my jate rings to fit? I don't fancy doing it myself as it would end up looking rubbish. Or should I just give up on the whole jate ring idea? |
||
|
9th Apr 2012 1:59pm |
|
| walfy Member Since: 29 Aug 2007 Location: Frome Posts: 2658 
|
The fairlead looks like the Devon stainless version. If you look in both pics you can see the D44 logo cut out. There fore having the thimble pulled into the fairlead isn't the best option but given that the SS will be stronger than the thimble it won't be a major issue 110 D250 SE HT
110 USW SOLD RRE HSE Dynamic Gone, wife killed it VOLVO XC60 R Dynamic with some toys Polaris RZR 900XP SOLD |
||
|
9th Apr 2012 3:55pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
