DEFENDER2.NET - View topic - ***Coolant Hose*** Catch it before it bursts

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > ***Coolant Hose*** Catch it before it bursts

Page 1 of 1

Print this entire topic ·

Yannis

Member Since: 02 Feb 2015
Location: Oxfordshire / Milan
Posts: 408

2015 Defender 90 Puma 2.2 CSW Corris Grey

***Coolant Hose*** Catch it before it bursts

Ciao,

I have just noticed that the coolant pipe from the water pump has been in contact with a metal clip on one of the other coolant pipes to the radiator. It has caused this small hole in the pipe. Luckily it doesn't quite go all the way through yet...

Click image to enlarge

If you have a RHD 2.2 puma I advise you go out and check it....

How much pressure runs through these pipes, I have spoken with Land Rover and will have it repaired ASAP but I'm worried about it bursting.

Also what is the part number of the hose below with the green marking?

Click image to enlarge

Thanks in advance

Yan

27th Jul 2016 6:43pm

miker

Member Since: 13 Sep 2015
Location: Surrey
Posts: 1764

Without knowing the coolant system, a couple of bar on the pump outlet side. I have successfully patched up pipes with self amalgamating tape while waiting for parts, just have to prep and clean the area well

27th Jul 2016 7:01pm

Yannis

Member Since: 02 Feb 2015
Location: Oxfordshire / Milan
Posts: 408

Right it's the hose from the water pump, I have found a few parts diagrams but only for the 2.4. Does anyone have one for the 2.2.

27th Jul 2016 7:55pm

Yannis

Member Since: 02 Feb 2015
Location: Oxfordshire / Milan
Posts: 408

I'm after the latest 2.2 puma page as shown below;

The puma equivalent of part 8 is what I need.

Click image to enlarge

27th Jul 2016 8:15pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20468

On the 2.4 where a hose goes past the PAS header, is one to keep an eye on too, as well as various clips can come off.

These hoses are surprisingly expensive too..

27th Jul 2016 8:57pm

pannawonica

Member Since: 21 Nov 2010
Location: Clackline Western Australia
Posts: 568

This maybe time too go full silicone pipe kit! You may change out the coolant as well, I always lose a little however carefull too collect it as I drain! Just done the MGR like this for peace of mind. Rubber pipes after a few years are too me always a concern on big trips, you can examine but I don't know a sure fired way of telling if they are good!

27th Jul 2016 11:57pm

Staftly

Member Since: 06 Jul 2012
Location: Lancashire
Posts: 55

2012 Defender 110 Puma 2.2 USW Orkney Grey

Same happened on my 2012 2.2. This is a known issue and should be fixed by your dealer. They replaced the pipe and added a few cable ties here and there. I think the new pipe is a slightly different shape so as to avoid a reoccurrence. I would certainly take it up with your local dealer.

28th Jul 2016 10:03am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6611

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

Possibly LR049202 - if that hose turns away from the camera where it goes out of site and into the water manifold?

Look at the water pump section of the parts catalogue - G04016

http://new.lrcat.com/#!/1235/3714/4066/316

1988 90 Td5 NAS soft top

2015 D90 XS SW

28th Jul 2016 10:52am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum