DEFENDER2.NET - View topic - Heater Fan and radio sometimes dont start...

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Heater Fan and radio sometimes dont start...

Page 1 of 1

Print this entire topic ·

dippyhull

Member Since: 20 Jun 2012
Location: East Yorks, UK
Posts: 36

2007 Defender 110 Puma 2.4 USW Orkney Grey

Heater Fan and radio sometimes dont start...

Bit of an odd one - hence I ask first before I go tear it apart...

Sometimes (often) on starting the heater fan and radio just don't work - on turning ignition off and on again I am pretty sure it has always started working!

So bad connection, sticking relay, dodgy fuse???? or is the a computer involved ? I'm not completely sure when it started - I have had someone mess with the system to stop it pumping the horn when locked with the doors open although can't see how that ought to be involved!

Thanks in advance!
Dave MY12 110 XS Ute, silver & grey now...
'75 109 fire engine (nearly ready to roll)...

20th Jul 2016 1:46pm

xpertoftheseas

Member Since: 05 Jan 2016
Location: Salisbury, Wilts
Posts: 164

2014 Defender 110 Puma 2.2 XS CSW Aintree Green

Both of these (blower motor & radio) are fed from the same contact on the ignition barrel (Aux).

Click image to enlarge

Click image to enlarge

The fact that you stop and start and it springs back to life most likely indicates an issue with the ignition barrel.

Next time it happens, if you check the power in your cigar lighter socket and it is not there, I would definitely look at the ignition barrel as this is fed from the same AUX contact (measure the voltage!)

Good luck. My 10th Land Rover, but my first Defender.

20th Jul 2016 10:19pm

dippyhull

Member Since: 20 Jun 2012
Location: East Yorks, UK
Posts: 36

hasn't happened since I wrote it - must have scared it off - not sure how I missed the fact that they are all on the aux contact - so massive ta for that although I don't fancy a new barrel

But let me go look see! MY12 110 XS Ute, silver & grey now...
'75 109 fire engine (nearly ready to roll)...

21st Jul 2016 3:23pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6586

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

You wouldn't need a new barrel, just the switch from the back - LR039638 aka PRC8230

Genuine is £55, Lucas OEM about £24

1988 90 Td5 NAS soft top

2015 D90 XS SW

21st Jul 2016 3:39pm

dippyhull

Member Since: 20 Jun 2012
Location: East Yorks, UK
Posts: 36

dippyhull wrote:
hasn't happened since I wrote it - must have scared it off - not sure how I missed the fact that they are all on the aux contact - so massive ta for that although I don't fancy a new barrel But let me go look see!

Ah well that sounds better ... MY12 110 XS Ute, silver & grey now...
'75 109 fire engine (nearly ready to roll)...

21st Jul 2016 5:28pm

110dc

Member Since: 12 Jan 2014
Location: wiltshire
Posts: 9

2008 Defender 110 Puma 2.4 XS DCPU Stornoway Grey

I have exactly the same problem with key in ignition point 1 all fine move key to 2 start engine and I lose radio, fans and cigarette lighter until I turn engine off. Is this a straight forward repair?

23rd Jul 2016 6:02pm

dippyhull

Member Since: 20 Jun 2012
Location: East Yorks, UK
Posts: 36

Will tell you when I try it - I don't really have time just now and am off away for a fortnight - so I am going for purchasing the part and taking it with me in case of the fault getting somewhat worse...

I also have the challenge of changing it - as clearly safer with the battery disconnected - but I found last time I did that that the alarm went off and would not stop until I reconnected and started the car... Shame (for the neighbours) that I tried that at about midnight ! MY12 110 XS Ute, silver & grey now...
'75 109 fire engine (nearly ready to roll)...

25th Jul 2016 9:27am

HardCharger

Member Since: 03 Mar 2013
Location: Manila
Posts: 715

2011 Defender 110 Puma 2.4 SW Stornoway Grey

You just need to replace the starter switch.

While you have all the cover bits off, check the headlight switch when open to see if it heats up, it's one of the causes for the ignition switch to warp and wear. If the switch heats up, add a relay kit to keep it cool and you shouldn't need to replace it for a good while. Switching your lights to LED will help lessen the load too.

25th Jul 2016 9:46am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum