Member Since: 17 Mar 2016
Location: Wiltshire
Posts: 40
PN for quick release fitting to fuel tank 2015 110
Getting on very well with prep for rust proofing. Fuel tank emptied and lowered just perfectly, but the feed hose had slightly less slack on it than I though, and one of the quick release connectors into the fuel sender snapped..
Click image to enlarge
Judging by how easy it snapped I'm guessing I'm not the first to have done this.
Any one care to help me out with a PN, and any tips on refitting back onto the fuel hose - aren't those attached warm?
Other than that, was able to get under and give her such a good clean, just need to allow her to dry for a week.
Thanks,
Moles.
4th Jun 2016 4:03pm
Moles
Member Since: 17 Mar 2016
Location: Wiltshire
Posts: 40
I'll answer my own question.
Looks like easier to replace the whole fuel pipe assembly - tank to filter.
Around £50, just need to talk to supplier to verify PN, but looks like it might be lr031344
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
5th Jun 2016 8:24am
