agentmulder
Member Since: 16 Apr 2016
Location: Outer Space
Posts: 1324
|
| Splines, brakes, swivel inspect/overhaul - what's involved? | |
Ok so a wee bit of slop/backlash at the rear (when moving it with the wheels up it sounds like the reflected 'clunk' I hear when driving near a wall).
Got a full set of Ferodo brake pads to install as well and then there is the swivel grease situation to check at the front.
Does anyone have a good list of do's and don'ts here and how best to disassemble/check/clean/lubricate/bleed/fix/replace/re-assemble/torque all of this? Or is it all along the lines of 'if you find a circlip, take it off', 'if you find a bolt, unscrew it' and everything makes sense in both directions?
Special tools?
Easy, but non-obvious ways to get around certain tasks?
Tightening torques for all the bolts??
I'm particularly interested in not stuffing up the brakes/brake hydraulics... 
Wisdom appreciated  Solved the bowel problem, working on the consonants...
|
12th May 2016 2:39am |
|
