DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > oil in the ecu

Page 1 of 1

Print this entire topic ·

slevani

Member Since: 21 Nov 2010
Location: ireland
Posts: 3

oil in the ecu

My td5 defender broke down in france. The problem is oil in the ecu. I was given a quote of 1,400 euros to fix. The largest part of the cost is due tto the engine harness ( 585 euro as it is landrover genuine part). + labour. The injector harness is less expensive and easier to replace. My question... can I get away with just changing the injector harness and just clean the engine harness (loom). Thank in advance !!

22nd Nov 2010 8:45pm

SiWhite

Member Since: 19 Jan 2010
Location: North Hampshire
Posts: 455

2013 Defender 110 Puma 2.4 USW Stornoway Grey

Yes.

Oil will continue to drain through the main harness into the ECU for a short while, but it will only become a problem when it reaches the multiplug.

Don't pay 1400 euros for a 30 euro part and an hour with a spanner and some solvent cleaner....

This is for a Disco but the oily bits are the same for the defender;

http://forums.lr4x4.com/index.php?showtopic=42788 My blog - www.anacreinhampshire.blogspot.co.uk

110 TD5 BuildHERE - sold!
110 Tdci Build HERE - sold!
Passat Alltrack - 4x4, auto, 45mpg, gloriously comfortable - but not a Defender!

22nd Nov 2010 10:11pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17352

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

This subject was comprehensively discussed very recently in this thread:-

http://www.defender2.net/forum/topic4426.html

One thing to note is that the oil leaks down the insides of the conductors and it will keep doing it unless you seal the connector in the new injector harness.

22nd Nov 2010 10:58pm

toshers

Member Since: 19 Sep 2010
Location: Inverurie
Posts: 120

2011 Defender 110 Puma 2.4 USW Orkney Grey

I've seen oil contamination inside the ECU box too. It might be worth opening that up to check while you're there.

23rd Nov 2010 4:22pm

slevani

Member Since: 21 Nov 2010
Location: ireland
Posts: 3

Thanks for the advice and the links. I am going to change the injector harness only and not the engine harmess. Apparently there was oil in the
ecu according to the mechanic (I thought opening the ecu is not a good idea). I will let you know how it goes

23rd Nov 2010 5:40pm

roel

Member Since: 08 Aug 2009
Location: Lelystad
Posts: 2039

You can open de ecu, but the top is tin and glued to the base.
I changed the both the looms as I didn't have to pay for the looms.

But it is some work to change them but it is not difficult.

In your case I would change the injector loom and open the ecu. (if it is already broken you can't damage much)

See if there is any oil in it and if so clean it. Clean the other connectors and see if it will be running fine. Roel

1984 90 2.5 na Diesel - RR V8 (1994-2001)
1997 Camel Trophy Discovery 300TDI (2001-2009)
2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts.
2003 90 Td5 (2009-now)

26th Nov 2010 2:29pm

slevani

Member Since: 21 Nov 2010
Location: ireland
Posts: 3

Thanks for your help, my td5 is running better than before. Sorry for the delay on getting back but I was out of town for couple of weeks. When i clean the connector will I need to disconnect the battery.

18th Dec 2010 9:26am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum