DEFENDER2.NET - View topic - Difflock not engaging

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Difflock not engaging

Page 1 of 1

Print this entire topic ·

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4209

2007 Defender 110 Puma 2.4 XS CSW Java Black

Difflock not engaging

Went to use difflock this morning. Worked ok on the way out, but on the way home engaged it before a tricky bit, thought the light came on but then noticed a load of wheel spin, looked down, no difflock light. Tried re-engaging, no joy, did a bit of reversing and manoeuvring to persuade it in, but won't engage.

Any ideas on what might be the fault or how to diagnose? 2007 110 TDCi Station Wagon XS

29th Nov 2021 11:23am

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

It sounds like the lever needs adjusting a little to fully engage is all. Doubt it is anything to worry about internally.

The job involves removing the transmission tunnel and adjusting the pivot point a tad. Whilst you are down there make sure the linkage is not seized and grease it all up.

29th Nov 2021 11:34am

piechipsandpeas

Member Since: 12 May 2021
Location: Albany, Western Australia
Posts: 209

2013 Defender 110 Puma 2.2 SW Indus Silver

Also check that the plastic cover (item no.2 on the attached picture) hasn't come out of its locating slots and is fouling on the lever mechanism preventing engagement. Its not held in by much more than gravity and the hopes and prayers of LR's engineers.

Click image to enlarge

29th Nov 2021 12:31pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum