DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > 2.4 tdci remap

Page 1 of 1

Print this entire topic ·

st86

Member Since: 16 Apr 2015
Location: Yorkshire
Posts: 11

2011 Defender 90 Puma 2.4 CSW Tamar Blue

2.4 tdci remap

Hi im sure this has been covered many times on here so sorry for that but ive got a 2.4 and wanting to get it remapped is it going to make any big difference saving up and going for the big intercooler at the same time or what other accompanying mods should i do to get the most out of it. BAS are nearest to me so will be using them do they offer a dual map service so you can have it on or back to standard and what sort of power output should i expect from it? Think she needs it my old 300tdi would eat it for breakfast upto 60mph

16th Apr 2015 8:01am

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Phone BAS.

You are correct there is loads about remaps on here and it has indeed been covered time and time again. Use the facility sandwiched between 'PMs' and 'Members' above. ^

If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

16th Apr 2015 9:29am

newhue

Member Since: 28 Apr 2014
Location: Brisbane
Posts: 351

I installed a popular mainstream intercooler first. IMO bang for buck is limited. Well made and almost a piece or art, but hard to see the bang.
I then installed a BAS remaps and bang for buck is huge. It works in all the right places and turns the old tractor into a modern tractor. Easy to install and service and back up very good. I have not done an exhaust as I found on another vehicle bang for buck was also very limited.
I guess intercoolers and exhaust all add a % to the overall power, but for me at AU$1800 to $2200 it pays for a lot of other things and would be less than 10% to the overall power outcome. My Defender and travels

16th Apr 2015 8:51pm

tatra805

Member Since: 16 Aug 2011
Location: Dolany
Posts: 436

2008 Defender 110 Puma 2.4 CSW Bonatti Grey

Another vote for BAS here

The remap will transform the vehicle but should always go with (my opinion):

- Airbox mod
- Opening up RAI mushroom (if fitted)
- evt a decat or a sport cat

(All related info to be found on here somewhere)

My opinion the 2.4 suffers from 2 things; air supply and over-fueling in 6th all resulting in less power and more heat.

Make no mistake, even without the other mods you'll notice a big change after remapping but opening up the airstream transforms it completely.

The intercooler will help keep things cool but without the other mods the power benefit is marginal.

I have ran in "thermal shut down" several times on the hottest days climbing hills before the intercooler and airflow mods.

17th Apr 2015 8:05am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20290

Alive.

17th Apr 2015 11:32am

bell-auto-services

Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232

2013 Defender 110 Puma 2.2 USW Orkney Grey

custom90steve wrote:
Alive.

Sorted.

http://dictionary.reference.com/browse/alive

adjective
1.
having life; living; existing; not dead or lifeless.

That will be me then hehe.

17th Apr 2015 12:01pm

bell-auto-services

Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232

Re: 2.4 tdci remap

st86 wrote:
Hi im sure this has been covered many times on here so sorry for that but ive got a 2.4 and wanting to get it remapped is it going to make any big difference saving up and going for the big intercooler at the same time or what other accompanying mods should i do to get the most out of it. BAS are nearest to me so will be using them do they offer a dual map service so you can have it on or back to standard and what sort of power output should i expect from it? Think she needs it my old 300tdi would eat it for breakfast upto 60mph

Its worth having the intercooler if you are keeping the car for sure and or working it hard.

For the switching remap whereyou can revert to standard we currently have the MPF interface designedto connect to a Android phone or tablet and used to control the interface.

https://secure.bellautoservices.co.uk/stor...landrover/

If you are an Apple person we are only a few weeks away from a different tool that will work on the Iphone or Ipad allowing switching on and off of the remap as well as diagnostic features and functions.

http://www.defender2.net/forum/topic36280.html

Kind regards Pete

17th Apr 2015 12:10pm

newhue

Member Since: 28 Apr 2014
Location: Brisbane
Posts: 351

Pete, having the map already, and being an Apple user, what's the costing or process to get that fancy software into my iPad. Seems whole lot easier for an unfortunate remote ordeal I hope I never have. My Defender and travels

19th Apr 2015 11:28am

bell-auto-services

Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232

Once the tool is available it will posted here, won't be long now.

http://www.defender2.net/forum/post413790.html#413790

Was your current remap installed with the BAS remap interface ?

19th Apr 2015 11:42am

Naks

Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2632

2010 Defender 90 Puma 2.4 SW Alpine White

Pete, what's the 'IMMO Fix' for the 2.4? --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged

Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ

19th Apr 2015 12:55pm

bell-auto-services

Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232

It's for cars with no 10as or immo problems on off road cars.

19th Apr 2015 1:38pm

newhue

Member Since: 28 Apr 2014
Location: Brisbane
Posts: 351

bell-auto-services wrote:
Once the tool is available it will posted here, won't be long now.

http://www.defender2.net/forum/post413790.html#413790

Was your current remap installed with the BAS remap interface ?

Yes. Using a Mac with bridging software for Windows. My Defender and travels

19th Apr 2015 7:20pm

bell-auto-services

Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232

Ok

Their will be some way to move over to the new tool hardware but you will need to return the car to standard with first the current BAS unit, erase it and then we will start again with the new hardware.

You can then sell on the erased BAS interface to recover some of the cost of the new unit, all is doable without to much trouble.

Pete

19th Apr 2015 7:31pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum